User guide

3
Chapter 1: Using the Gigabit SFP Modules
Introduction
Thank you for choosing the Gigabit SFP Modules. These Modules insert into
the mini-GBIC ports on either the SR2024 or SR224G, creating new Gigabit
ports. Each Gigabit SFP Module is hot-swappable, meaning you can connect
them even when the switch is running.
Use the following directions for installing and removing either the MGBLH1
and MGBSX1 or the MGBT1.
Installation and Removal Direc-
tions for the MGBLH1 and
MGBSX1
1. Insert the Gigabit SFP Module with
the printed side up and the rubber
port cap facing out.
2. Remove the Gigabit SFP Module’s
rubber port cap.
3. Connect the fiber cable’s LC Con-
nector to the Gigabit SFP Module’s
port.
Figure 1-1: Insert the Module
Figure 1-2: Removing the rubber port cap
Figure 1-3: Connect the fiber cable