Datasheet

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)

CONFIGURING the SERVER

Caveats

■ Note that only a single Cisco VIC card (the half-height Cisco VIC 1225 and 1285 PCIe card) is

supported and it must be installed in the full-height PCIe slot (slot 1) on riser 1. So take this

into account when populating RAID controller cards.

■ You can choose an optional RAID configuration (RAID 0, 1, 5, 6, or 10), which is

preconfigured at the factory. The RAID level you choose must be an available RAID choice for

the controller selected. RAID levels 50 and 60 are supported, although they are not available

as configuration options.

NOTE: RAID for the external RAID controllers (LSI MegaRAID SAS 9286CV-e and LSI

MegaRAID SAS 9285CV-e) is not factory configured.

NOTE: For more important information regarding RAID combinations and support,

see

RAID Details, page 67 and RAID Option ROM (OPROM) Settings, page 68.