Datasheet

Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 6
The following key features are supported:
ATM Classes of Service support for: Unspecified Bit Rate (UBR), UBR+ (SVC’s only), Variable Bit Rate
real-time (VBR-rt), Variable Bit Rate non-real time (VBR-nrt), Constant Bit Rate (CBR), and Available
Bit Rate (ABR)
RFC 1483 and RFC 1577 support
1024 maximum simultaneous Virtual Connections (VCs)
8 bits of VPI (VPI range 0-255), 16 bits of VCI (VCI range 0-65535)
Permanent Virtual Circuits (PVCs) and Switched Virtual Circuits (SVCs)
PLCP and HEC cell delineation support
Operations and Management (F4,F5 OAM) cell support
LANE support
ILMI 1.0 support
IETF PPP over ATM support
Multiprotocol Label Swapping (MPLS) VPN support
MPOA Client and Server
Next Hop Routing Protocol (NHRP)
On-line Insertion and Removal (OIR) on 3845
Permanent Virtual Path (PVPs) support
FRF.5/8 Interworking
ITU-T G.703 Compliant
ATM Traffic Management 4.1 compliant
ATM Forum UNI 3.1/4.0 PVC compliant
ATM Forum UNI 4.0 SVC compliant
Table 1 shows minimum Cisco IOS release and feature sets requirement for the product.
Table 1. Cisco IOS Support and Orderability Matrix for DS3/E3 ATM Network Modules
Product IOS S/W Version Required IOS Feature Sets or Licenses
Required
Maximum supported
Cisco 2800 Series
(2811, 2821, 2851)
12.4(15)T All Cisco IOS12.4(15)T and above “SP
Services” feature sets
1
Cisco 3825 12.4(15)T All Cisco 12.4(15)T and above “SP
Services” feature sets
1
Cisco 3845 12.4(15)T All Cisco 12.4(15)T and above “SP
Services” feature sets
2
11
Cisco 3925 15.0(1)M Data License 1
22
Cisco 3945 15.0(1)M Data License 2
2
1
Maximum recommended modules does not imply will meet performance at wire rate
2
Support for the DS3/E3 ATM network module in the 3925, and 3945 will be via the network module adapter card (SM-NM-ADPTR)