Datasheet

Connecting Cisco Unity Express Network Modules to the Network
Cisco Unity Express Network Module LEDs
2
Connecting Cisco Unity Express Network Modules to the Network
Figure 1 NM-CUE Faceplate
Cisco Unity Express Network Module LEDs
All network modules have an enable (EN) LED. This LED indicates that the module has passed its
self-tests and is available to the router.
All Cisco Unity Express network modules display an additional power (PWR) LED and a CompactFlash
(CF) LED on the faceplate, and two additional LEDs for the Fast Ethernet port. (See Figure 2.)
Note The CF and Fast Ethernet port LEDs are not used by the Cisco Unity Express network module.
Figure 2 NM-CUE LEDs
88734
NM-CUE
ENPWR
FastEthernet 0
DISK
LINK ACT
NOT SUPPORTED
CF
LED Meaning
ACT There is activity on the Fast Ethernet connection.
Note This LED is not used on the NM-CUE.
CF The compact Flash module is active.
Note This LED is not used on the NM-CUE.
DISK There is activity on the 20-GB disk-expansion module hard drive.
EN The module has passed self-test and is available to the router.
LINK The Fast Ethernet connection is available to the network module.
Note This LED is not used on the NM-CUE.
PWR Power is available to the network module.
88735
NM-CUE
ENPWR
FastEthernet 0
DISK
LINK ACT
NOT SUPPORTED
CF
CF
ACTLINK
PWR EN
DISK