Datasheet

© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 10 of 15
Feature Description
Number of Connectors/Ports
Two
MTBF
3,270,000 hours
Table 8. VIC2-2FXO and VIC2-4FXO Specifications. 2- or 4-Port FXO Voice/Fax Interface Card with Battery Reversal Detection and
Caller ID (for all countries). Includes support for North American analog CAMA trunk interface (user side).
Feature Description
Interface Type
FXO
Cisco IOS Software Release
12.2.(15)ZJ
Cisco Part Number
VIC2-2FXO: 800-21597-01, VIC2-4FXO: 800-21589-01
Compliance
FCC Class B device, CE
Safety Conformance
UL1950
Spare
VIC2-2FXO=, VIC2-4FXO=
Signaling Modes
Loop start, ground start
Address Signaling Formats
• In-band DTMF
• Out-of-band pulse (10/20 pps)
Tone Disconnect Supervision
Call disconnect on progress tone of less than 600 Hz
Battery Polarity Reversal Detection
Detection of disconnect supervision and far-end answer supervision via battery polarity reversal
Power Interrupt Disconnect
Call disconnect on power interrupt of > 600 ms
Physical Connector
RJ-11
Number of Connectors/Ports
Two for VIC2-2FXO, four for VIC2-4FXO
MTBF
2,043,450 hours for VIC2-2FXO; 1,245,152 hours for VIC2-4FXO
Table 9. VIC2-2E/M Specifications. 2-Port E&M Voice/Fax Interface Card
Feature Description
Interface Type
E&M (For PBX trunking, Hoot Phones, or radio systems)
Cisco IOS Software Release
12.2.(15)ZJ
Cisco Part Number
800-21342-01
Compliance
FCC Class B device, CE
Safety Conformance
UL 1950
Spare
VIC2-2E/M=
Address Signaling Formats
• In-band DTMF
• Out-of-band pulse (10/20 pps)
Signaling Modes
Immediate, delay dial, wink start
Signaling Types
I, II, III, and V
E-Lead Current Limit
100 mA
M-Lead Sensitivity
> 3 mA
Pulse Distortion
< 2 percent