Datasheet

© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 13 of 15
Table 14. E1 Network Interface
Feature Description
Transmit Bit Rate
2.048 Mbps ± 100 bps/50 PPM
Receive Bit Rate
2.048 Mbps ± 100 bps/50 PPM
Data Rate
1.984 Mbps (framed mode) per E1 port
Clocking
Internal and loop (recovered from network)
E1 National Bits
Fixed (non-configurable)
Encoding
HDB3
DTE Interface (WIC mode)
Fractional service
DTE Interface (VIC mode)
G.704/structured
DCE Interface
G.704/structured
Homologation
The following Cisco VICs are approved for the countries listed below (Table 15). The approvals are for off-premise and on-premise connections,
unless stated otherwise.
For the latest country approval status of these cards, please refer to this web page:
http://tools.cisco.com/cse/prdapp/jsp/externalsearch.do?action=externalsearch&page=EXTERNAL_SEARCH
For the approval status of Cisco VWIC cards, please see the data sheet for “Cisco One and Two Port T1/E1 Multiflex Voice/WAN Interface Cards.”
Table 15. Cisco Voice Interface Card Approval by Country
VIC2-2FXO VIC2-4FXO
VIC2-2FXS
(on Premise Only)
VIC-4FXS/DID
(on Premise Only)
VIC2-2E/M
(on Premise Only)
VIC-2DID VIC2-2BRI -NT/TE
United States United States United States United States United States United States United States
Canada
CE countries*
Australia
Japan
Hungary
Poland
Croatia
Singapore
Canada
CE countries*
Australia
Japan
Hungary
Poland
Croatia
Singapore
Canada
CE countries*
Australia
Japan
Hungary
New Zealand
Canada
CE countries*
Australia
Japan
Canada
CE countries*
Australia
Japan
Hungary
Singapore
Canada
CE
countries*
Australia
Taiwan
Hong Kong
Brazil
Slovakia
Canada
CE countries*
Japan
Hungary
Poland
* European Community countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,
Spain, Sweden, Switzerland, United Kingdom.