Datasheet

© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 7 of 15
ADDITIONAL FEATURES
Cisco IOS Software and Platform Support
• Fully supported via Cisco IOS Software command-line interface (CLI) including device configuration, monitoring, link status, network security,
Layer 2 and 3 protocol configuration and management, and call history
• Supported on all Cisco 2600XM and 2800 Series, Cisco 2691, 3640/A, and 3660, and Cisco 3700 and 3800 Series voice gateway routers
Traditional Circuit-Switched PBX Support
• Verified PBX interoperability with Lucent Definity series (G3r), Nortel Meridian series (Option 11), Siemens HICOM 330E, NEC NEAX 2400,
Alcatel 4400, and Ericsson MD110. Other PBXs continue to be tested.
Network Management Support
• Cisco CallManager
• Simple Network Management Protocol (SNMP) compliant
• Manageable via a Management Information Base (MIB) browser
• CiscoView interface for configuration
• ConfigMaker
• NetSys supported
SOFTWARE AND MEMORY REQUIREMENTS
Table 4 shows the software and memory requirements for the Cisco IP Communications voice/fax network modules and Cisco voice interface cards.
Table 4. Software and Memory Requirements for Voice/Fax Network Modules and Voice Interface Cards
Cisco IOS Software Version
Product
Cisco 2600XM and 2691
Series Cisco 2800 Series Cisco 3600 and 3700 Series Cisco 3800 Series
NM-HD-1V
NM-HD-2V
NM-HD-2VE
• Cisco IOS Software
Release 12.2.(15)ZJ or
12.3(4)T
• “Plus” images
• Cisco IOS Software
Release 12.3(8)T4
• “IP Voice” images
• Cisco IOS Software Release
12.2.(15)ZJ or 12.3(4)T
• “Plus” images
• Cisco IOS Software
Release 12.3(11)T
• “IP Voice” images
VIC2-2FXS
VIC-4FXS/DID
VIC2-2FXO
VIC2-4FXO
VIC2-2E/M
VIC-2DID
VIC2-2BRI-NT/TE
VWIC-xMFT-xx
• Cisco IOS Software
Release 12.2.(15)ZJ or
12.3(4)T
• “Plus” images
• Cisco IOS Software
Release 12.3(8)T4
• “IP Voice” images
• Cisco IOS Software Release
12.2.(15)ZJ or 12.3(4)T
• “Plus” images
• Cisco IOS Software
Release 12.3(11)T
• “IP Voice” images
Note: Use Cisco CallManager version 3.3(3) for MGCP support.
Note: Please refer to the Cisco IOS Software release notes for determining the minimum flash and dynamic RAM (DRAM) requirements.