Datasheet

© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 9 of 15
VIC Specifications
Tables 6–11 show the specifications for the Cisco Voice Interface Cards (VIC).
Table 6. VIC2-2FXS Specifications. 2-Port FXS Voice/Fax Interface Card (for on-premise use only)
Feature Description
Interface Type
FXS (on-premise connection only)
Cisco IOS Software Release
12.2.(15)ZJ
Cisco Part Number
800-21341-01
Compliance
FCC Class B device, CE
Safety Conformance
UL1950
Spare
VIC2-2FXS=
Address Signaling Formats
• In-band DTMF
• Out-of-band pulse (10/20 pps)
Signaling Modes
Loop start, ground start
Ringing Tone
Configurable for different country requirements
Ringing Voltage
>40 Vrms at 5 REN at 25 Hz (configurable frequency); 5 REN max per port, 8 REN total per VIC2-2FXS
Ringing Frequencies
20 Hz, 50 Hz
Loop Length
<1500 ft (450 m.) 24 AWG Category 5 twisted pair cable
Physical Connector
RJ-11
Number of Connectors/Ports
Two
MTBF
2,534,574 hours
Table 7. VIC-2DID Specifications. 2-Port DID Voice/Fax Interface Card. (Note: FXS support on VIC-2DID is in 12.4.3 and
12.4(2nd)T)
Feature Description
Interface Type
DID trunk
Cisco IOS Software Release
12.2.(15)ZJ
Cisco Part Number
800-06487-01
Compliance
FCC Class B device, CE
Safety Conformance
UL1950
Spare
VIC-2DID=
Address Signaling Formats
• In-band DTMF
• Out-of-band pulse (10/20 pps)
Signaling Modes
Immediate, delay dial, wink start
Disconnect Supervision
Power denial (Calling Party Control, far-end disconnect)
Caller ID
On-hook transmission of frequency-shift-keying (FSK) data
Physical Connector
RJ-11