USER GUIDE PrintServer for USB with 4-Port Switch Model: PSUS4 (EU)
About This Guide About This Guide Icon Descriptions While reading through the User Guide you may see various icons that call attention to specific items. Below is a description of these icons: NOTE: This check mark indicates that there is a note of interest and is something that you should pay special attention to while using the product. WARNING: This exclamation point indicates that there is a caution or warning and it is something that could damage your property or product.
Table of Contents Chapter 1: Product Overview 1 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Overview Chapter 1 Chapter 1: Product Overview Thank you for choosing the Linksys PrintServer for USB with 4-Port Switch (PrintServer). The PrintServer will allow you to network your printers. The PrintServer lets you connect a USB printer directly to your network, eliminating the need to dedicate a PC to print serving chores. In addition, the PrintServer includes a 4-port 10/100 switch, so you can easily add more devices to your network.
Configuration Chapter 2 Chapter 2: Configuration The PrintServer has been designed to be functional right out of the box with the default settings in the Setup Wizard. However, if you’d like to change these settings, you can use the PrintServer’s web-based utility. This chapter will describe each web page in the utility and each page’s key functions. The utility can be accessed via your web browser through the use of a computer.
Configuration Chapter 2 The Protocol Tab > TCP/IP Click the TCP/IP tab to view or change the TCP/IP values of the PrintServer. allows computers to talk to each other using Ethernet. Typically only Macintosh computers use AppleTalk, although other platforms can be made to use it with extra software. Protocol > Apple Talk Communication Protocol > TCP/IP IP Address Obtain an IP Address Automatically If you are using DHCP to assign IP addresses, select Obtain an IP Address Automatically.
Configuration Chapter 2 Domain Name Enter the name of the domain that you want to associate with the PrintServer. If you are unsure of the Domain Name, you can find it out by looking on any computer already on the network. In Windows 98, rightclick Network Neighborhood and select Properties. Under the Identification tab, you will see a list of that computer’s name, and the Domain to which it is connected. For Windows Me and 2000, right-click My Network Places.
Configuration Chapter 2 Select Printer Logical Printer No: In the drop-down menu, select the logical printer number (1-3) you wish to configure. Click Get Data to update the display with the current data for the selected logical printer. Details Pre-string (Hex) Enter the printer control string (in hexadecimal characters) to be sent to the printer before each print job. This string cannot exceed 30 characters.
Internet Printing Protocol Chapter 3 Chapter 3: Internet Printing Protocol Overview Internet Printing Protocol (IPP) is a new standardsbased system to allow remote printing from a PC to any accessible printer. Normally, the printer will be attached to a computer or other device that functions as an IPP Server. For client PCs, it is necessary to install a compatible IPP Client program. The Client must also know the IP Address or URL of the IPP Server.
Internet Printing Protocol Chapter 3 •• To create additional IPP ports, repeat the entire procedure. •• The Proxy Server and other options are set individually for each IPP Port. Changing the IPP Port Settings After the IPP port is created, you can reach the Configure IPP Port screen by performing these steps: 1. Open the Printers folder (click Start, click Settings, and then click Printers). 2. Right-click the IPP Printer and select Properties. 3.
Chapter 3 Internet Printing Protocol •• A printer problem has caused the IPP Server to cease responding, and a restart (reboot) is required. •• The Server’s IP Address has changed. •• The Internet connection for the IPP Server is down. •• Network congestion causes the connection attempt to time out. If using the supplied IPP Client software, there are two settings—Retry Interval and Retry Count—that can be adjusted if you have problems connecting to the IPP Server.
Bi-Admin Management Chapter 4 Chapter 4: Bi-Admin Management Overview The PrintServer is managed by a utility program called Bi-Admin on the PrintServer’s Setup CD. Fully compatible with Windows 98, Me, 2000, and XP, Bi-Admin allows you to change the PrintServer’s internal settings, check the unit’s status, and perform basic diagnostic tests. Note that the Bi-Admin program must be installed only on the network administrator’s computer. First, you will install Bi-Admin on your computer.
Bi-Admin Management Chapter 4 6. When the Bi-Admin is installed, the Setup Complete screen will appear. Click Finish to continue. The Bi-Admin Management Utility The Bi-Admin Management Utility screen will appear next. Any hardware found on the network will appear on the left-hand side of the screen. The Utility can be managed from this screen. Setup Complete Starting the Bi-Admin Management Utility 1.
Bi-Admin Management Chapter 4 If the printer is Bi-directional, and is not busy, the Printer Configuration button will appear, as shown above. If the items are not read only, you can change the Environmental Variable and Variable Value items based on the options of your printer. For more information, click Help. Device Information Configuration You may configure the PrintServer with this option. If you click this option, a Verify Password screen appears.
Bi-Admin Management Chapter 4 Main Menu > Configuration Screen Tabs The Configuration screen displays six tabs: System, TCP/IP, Apple Talk, NETBEUI, Internet Printing, and Port. The tabs are described below. •• TCP/IP You first need to specify whether the PrintServer’s IP address will be automatically assigned via DHCP, or if it is a fixed (also called static) IP address. If you use DHCP to assign IP addresses, select Dynamic IP Address (DHCP). This is enabled by default.
Bi-Admin Management Chapter 4 To find your router’s IP address, consult your router’s documentation. The IP Address and Subnet Mask are the same as those of any PC connected to the network. If you change the PrintServer’s IP address, make sure you that you reconnect to the PrintServer using the new IP address. Otherwise, you will not be communicating with the PrintServer. The Gateway IP Address is not necessary for using the PrintServer.
Bi-Admin Management Chapter 4 •• Internet Printing Configuration > Internet Printing Tab Enter the address of your mail server in the Mail Server IP Address field. (This value must be a fixed IP address.) Next enter the mail account name in the Mail Account field and the password in the Password field. Enter the password again in the Confirm Password field. Then, enter the time interval for the PrintServer to check for e-mail to be printed, in hours and minutes in the Check Mail Interval: field.
Bi-Admin Management Chapter 4 InitDevice Option When you select InitDevice from the menu bar, these options are displayed: •• Reset Device •• Restore to Factory Default •• Attached Remote •• Connected Protocol If you click Attached Remote, the Attached Remote screen appears. To add a cross segment print server, enter the IP address in the fields, and click Set. Click Cancel to undo any changes. For more information, click Help.
Troubleshooting Appendix A Appendix A: Troubleshooting If the PrintServer is not working correctly, follow the advice in this chapter. If you have trouble printing, make sure that all Ethernet and USB cables connected to the PrintServer are plugged in securely. If the problem continues, refer to Chapter 4: Bi-Admin Management, page 9. All the LEDs on the front of the PrintServer are off Check the power supply and the power connection.
Specifications Appendix B Appendix B: Specifications Model PSUS4 Ports 4 10/100 RJ-45 Ports Auto MDI/MDI-X, USB, Power Buttons Reset LEDs Status, USB, 1-4 Cabling Type Category 5 or better, USB 1.1 cable with Type-B female and Type-A male connectors Environmental Dimensions 93 x 30 x 90 mm Weight 221 g Power External, 5V DC, 2,5A Certification FCC Class B, CE Operating Temp. 0ºC to 40ºC Storage Temp.
Appendix C Appendix C: Warranty Information Limited Warranty Linksys warrants that this Linksys hardware product will be substantially free of defects in materials and workmanship arising under normal use during the Warranty Period, which begins on the date of purchase by the original enduser purchaser and lasts for the period specified below: •• Two (2) years for new product •• Ninety (90) days for refurbished product This limited warranty is non-transferable and extends only to the original end-user pur
Appendix C Warranty Information and a copy of your dated proof of original purchase when returning your product. Products received without a RMA number and dated proof of original purchase will be rejected. Do not include any other items with the product you are returning to Linksys. Defective product covered by this limited warranty will be repaired or replaced and returned to you without charge.
Regulatory Information Appendix D Appendix D: Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix D User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products.
Appendix D Regulatory Information Eesti (Estonian) - Keskkonnaalane informatsioon Euroopa Liidus asuvatele klientidele Français (French) - Informations environnementales pour les clients de l’Union européenne Euroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on seadmeid, millel on tootel või pakendil käesolev sümbol , keelatud kõrvaldada koos sorteerimata olmejäätmetega. See sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest olmejäätmevoogudest.
Appendix D Regulatory Information Lietuvškai (Lithuanian) - Aplinkosaugos informacija, skirta Europos Sąjungos vartotojams Nederlands (Dutch) - Milieu-informatie voor klanten in de Europese Unie Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį), negalima šalinti kartu su nerūšiuotomis komunalinėmis atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai nuo bendro buitinių atliekų srauto.
Appendix D Regulatory Information Português (Portuguese) - Informação ambiental para clientes da União Europeia Slovenščina (Slovene) - Okoljske informacije za stranke v Evropski uniji A Directiva Europeia 2002/96/CE exige que o equipamento que exibe este símbolo no produto e/ou na sua embalagem não seja eliminado junto com os resíduos municipais não separados. O símbolo indica que este produto deve ser eliminado separadamente dos resíduos domésticos regulares.
Appendix E Appendix E: Software License Agreement Software in Linksys Products This product from Cisco-Linksys LLC or from one of its affiliates Cisco Systems-Linksys (Asia) Pte Ltd. or CiscoLinksys K.K. (“Linksys”) contains software (including firmware) originating from Linksys and its suppliers and may also contain software from the open source community. Any software originating from Linksys and its suppliers is licensed under the Linksys Software License Agreement contained at Schedule 1 below.
Software License Agreement Appendix E your Linksys product and/or the Software is being used in accordance with the terms of this Agreement; (iii) to provide improvements to the way Linksys delivers technology to you and to other Linksys customers; (iv) to enable Linksys to comply with the terms of any agreements it has with any third parties regarding your Linksys product and/or Software and/or (v) to enable Linksys to comply with all applicable laws and/or regulations, or the requirements of any regulat
Appendix E GNU General Public License is intended to guarantee your freedom to share and change free software–to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
Appendix E c. If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License.
Software License Agreement Appendix E 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
Appendix E GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Appendix E freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library” and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.
Appendix E Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
Appendix E Software License Agreement b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. 8.
Software License Agreement Appendix E software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12.
Appendix E Software License Agreement OpenSSL License Original SSLeay License Copyright © 1998-2007 The OpenSSL Project. All rights reserved. Copyright © 1995-1998 Eric Young (eay@cryptsoft.com)All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). 1.
Appendix E Software License Agreement DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
