A P P E N D I X A Power Supply Specifications This appendix describes the Catalyst 6500 series power supplies and provides their specifications.
Appendix A Power Supply Specifications Power Supply Compatibility Matrix Table A-1 Catalyst 6500 Series Power Supplies (continued) Power Supply Rating AC-Input Model Product Number DC-Input Model Product Number 4000 W WS-CAC-4000W-US1 PWR-4000-DC WS-CAC-4000W-INT 6000 W WS-CAC-6000W PWR-6000-DC 8700 W WS-CAC-8700W-E Not Available 1. For use with the Catalyst 6503 and Catalyst 6503-E switches only. 2. For use with the Catalyst 6504-E switch only.
Appendix A Power Supply Specifications Power Supply Compatibility Matrix Table A-2 Catalyst 6500 Series Switch Supported Power Supply Configurations (continued) Platform Catalyst 6506 Catalyst 6506-E Catalyst 6509 Catalyst 6509-E Catalyst 6509-NEB Supported Power Supplies Chassis/Power Supply Restrictions • 1000 W AC-input • 1300 W AC-input and DC-input • 2500 W AC-input and DC-input • 3000 W AC-input The 6000 W AC-input, 6000 W DC-input, and the 8700 W AC-input power supplies are limited
Appendix A Power Supply Specifications Power Supply Compatibility Matrix Table A-2 Catalyst 6500 Series Switch Supported Power Supply Configurations (continued) Platform Catalyst 6509-NEB-A Catalyst 6509-V-E Catalyst 6513 Supported Power Supplies Chassis/Power Supply Restrictions • 2500 W AC-input and DC-input • 3000 W AC-input • 4000 W AC-input and DC-input • 6000 W AC-input and DC-input • 8700 W AC-input The 6000 W AC-input, 6000 W DC-input, and the 8700 W AC-input power supplies are l
Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies 950 W AC-Input and DC-Input Power Supplies The 950 W AC-input (PWR-950-AC) and DC-input (PWR-950-DC) power supplies can be installed in the Catalyst 6503 and Catalyst 6503-E switch chassis only. Due to form factor differences, the 950 W AC-input and DC-input power supplies cannot be installed in any other Catalyst 6500 series switch chassis.
Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies Figure A-3 DC Power Entry Module (PEM) 950 W Power Supply Specifications Table A-3 lists the specifications for the 950 W AC-input power supply.
Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies Table A-3 950 W AC-Input Power Supply Specifications (continued) Specification Description Branch circuit requirement Each chassis power supply should have its own dedicated, fused-branch circuit: • For North America—15 A • For International—Circuits sized to local and national codes • All Catalyst 6500 series AC-input power supplies require single-phase source AC. • All AC power supply inputs are fully isolated.
Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies Table A-4 lists the specifications for the 950 W DC-input power supply. Table A-4 950 W DC-Input Power Supply Specifications Specification Description DC-input voltage –48 VDC to –60 VDC continuous DC-input current Power supply output capacity Power supply output • 38 A @ –48 VDC • 30 A @ –60 VDC 950 W • 15 A @ +1.5 VDC • 2.5 A @ +3.3 VDC • 19.
Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies 950 W Power Supply AC Power Cords Table A-6 lists the 950 W AC-input power supply AC power cords specifications. These power cords plug into the 950 W PEM(PEM-15A-AC), not directly into the power supply. The table includes references to power cord illustrations. Table A-6 Note All 950 W power supply power cords are 8 feet 2 inches (2.5 meters) in length.
Appendix A Power Supply Specifications 1000 W AC-Input Power Supply 1000 W AC-Input Power Supply The 1000 W AC-input power supply (WS-CAC-1000W) is supported in the following Catalyst 6500 series switches: • Catalyst 6506 • Catalyst 6509 • Catalyst 6509-NEB The 1000 W power supply (shown in Figure A-4) shares the same form factor as the 1300 W, 2500 W, 3000 W, 4000 W, and 6000 W AC-input power supplies.
Appendix A Power Supply Specifications 1000 W AC-Input Power Supply 1000 W Power Supply Specifications Table A-7 lists the specifications for the 1000 W AC-input power supply. Table A-7 1000 W Power Supply Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC) Note AC-input voltage AC-input current Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies.
Appendix A Power Supply Specifications 1000 W AC-Input Power Supply Table A-7 1000 W Power Supply Specifications (continued) Specification Description Power supply output capacity 1000 W Power supply output Output holdup time kVA rating 1 • 15 A @ +3.3 VDC • 5 A @ +5 VDC • 6 A @ +12 VDC • 20.3 A @ +42 VDC 20 ms minimum 1.25 kVA Heat dissipation 4213 BTU/hour (approx.) Front panel LEDs Weight 14.8 lb (6.7 kg) 1.
Appendix A Power Supply Specifications 1300 W AC-Input and DC-Input Power Supplies 1000 W Power Supply AC Power Cords Table A-9 lists the specifications for the AC power cords that are available for the 1000 W AC-input power supply. The table includes references to power cord illustrations. Table A-9 Note All 1000 W power supply power cords are 8 feet 2 inches (2.5 meters) in length. Note All 1000 W power supply power cords have an IEC60320/C15 appliance plug at one end.
Appendix A Power Supply Specifications 1300 W AC-Input and DC-Input Power Supplies Figure A-5 1300 W AC-input Power Supply Figure A-6 1300 W DC-Input Power Supply Catalyst 6500 Series Switches Installation Guide A-14 OL-5781-07
Appendix A Power Supply Specifications 1300 W AC-Input and DC-Input Power Supplies 1300 W Power Supply Specifications Table A-11 lists the specifications for the 1300 W AC-input power supply. Table A-10 1300 W AC-Input Power Supply Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC). Note AC-input voltage AC-input current Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies.
Appendix A Power Supply Specifications 1300 W AC-Input and DC-Input Power Supplies Table A-10 1300 W AC-Input Power Supply Specifications (continued) Specification kVA rating Description 1 1.625 kVA Heat dissipation 5478 BTU/hour (approx.) Weight 18.4 lb (8.3 kg) 1. The kVA rating listed for the power supply should be used as the sizing criteria for both UPS outputs as well as standard circuits and transformers to power a switch.
Appendix A Power Supply Specifications 1300 W AC-Input and DC-Input Power Supplies Table A-12 1300 W AC-Input and DC-Input Power Supply LEDs LED Meaning INPUT OK AC-input power supplies: • Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply turned off. DC-input power supplies: FAN OK OUTPUT FAIL • Green—Source DC voltage is OK. (Input voltage is –40.5 VDC or greater.
Appendix A Power Supply Specifications 1400 W AC-Input Power Supply Table A-13 1300 W Power Supply AC Power Cords Locale Power Cord Part Number AC Source Plug Type Cordset Rating Power Cord Reference Illustration Argentina CAB-7513ACR= IRAM 2073 10 A, 250 VAC Figure A-31 Australia, New Zealand CAB-7513ACA= SAA AS 3112 15 A, 250 VAC Figure A-32 Continental Europe CAB-7513ACE= CEE 7/7 16 A, 250 VAC Figure A-33 Israel CAB-AC-2500W-ISRL= SI16S3 16 A, 250 VAC Figure A-34 Italy CAB-7
Appendix A Power Supply Specifications 1400 W AC-Input Power Supply Figure A-8 1400 W AC-Input PEM (PEM-20A-AC+) 1400 W Power Supply Specifications Table A-14 lists the specifications for the 1400 W AC-input power supply. Table A-14 1400 W AC-Input Power Supply Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC).
Appendix A Power Supply Specifications 1400 W AC-Input Power Supply Table A-14 1400 W AC-Input Power Supply Specifications (continued) Specification Description Branch circuit requirement Each chassis power supply should have its own dedicated, fused-branch circuit: • For North America—20 A • For International—Circuits sized to local and national codes • All AC power supply inputs are fully isolated.
Appendix A Power Supply Specifications 1400 W AC-Input Power Supply Table A-15 LED INPUT OK FAN OK OUTPUT FAIL 1400 W AC-Input Power Supply LEDs Meaning • Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. • Green—Power supply fan is operating properly. • Off—Power supply fan failure is detected.
Appendix A Power Supply Specifications 1400 W AC-Input Power Supply Table A-16 1400 W Power Supply AC Power Cords Locale Power Cord Part Number AC Source Plug Type Cordset Rating Power Cord Reference Illustration Argentina CAB-7513ACR= IRAM 2073 16 A, 250 VAC Figure A-31 Australia, New Zealand CAB-7513ACA= SAA AS 3112 15 A, 250 VAC Figure A-32 People’s Republic of China CAB-AC16A-CH= GB16C 16 A, 250 VAC Figure A-37 Continental Europe CAB-7513ACE= CEE 7/7 16 A, 250 VAC Figure A-33
Appendix A Power Supply Specifications 2500 W AC-Input and DC-Input Power Supplies 2500 W AC-Input and DC-Input Power Supplies The 2500 W AC-input power supply (WS-CAC-2500W) and 2500 W DC-input power supply (WS-CDC-2500W) are supported in the following Catalyst 6500 series switches: • Catalyst 6506 • Catalyst 6506-E • Catalyst 6509 • Catalyst 6509-E • Catalyst 6509-NEB • Catalyst 6509-NEB-A • Catalyst 6509-V-E • Catalyst 6513 The 2500 W power supplies, shown in Figure A-9 and Figure A-10,
Appendix A Power Supply Specifications 2500 W AC-Input and DC-Input Power Supplies Figure A-10 2500 W DC-input Power Supply 2500 W Power Supply Specifications Table A-17 lists the specifications for the 2500 W AC-input and DC-input power supplies. Table A-17 2500 W AC-Input Power Supply Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC).
Appendix A Power Supply Specifications 2500 W AC-Input and DC-Input Power Supplies Table A-17 2500 W AC-Input Power Supply Specifications (continued) Specification Description Branch circuit requirement Each chassis power supply should have its own dedicated, fused-branch circuit: • For North America—20 A • For International—Circuits sized to local and national codes • All AC power supply inputs are fully isolated.
Appendix A Power Supply Specifications 2500 W AC-Input and DC-Input Power Supplies Table A-18 2500 W DC-Input Power Supply Specifications Specification Description DC-input voltage –48 VDC to –60 VDC continuous DC-input current Power supply output capacity Power supply output DC input terminal block Output holdup time Heat dissipation Weight • 80 A @ –40.5 VDC • 70 A @ –48 VDC • 55 A @ –60 VDC 2500 W maximum (–48 to –60 VDC) • 15 A @ +3.3 VDC • 5 A @ +5 VDC • 10 A @ +12 VDC • 55.
Appendix A Power Supply Specifications 2500 W AC-Input and DC-Input Power Supplies Table A-19 2500 W AC-Input and DC-Input Power Supply LEDs LED Meaning INPUT OK AC-input power supplies: • Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. DC-input power supplies: FAN OK OUTPUT FAIL • Green—Source DC voltage is OK. (Input voltage is –40.5 VDC or greater.
Appendix A Power Supply Specifications 2500 W AC-Input and DC-Input Power Supplies 2500 W Power Supply AC Power Cords Table A-20 lists the specifications for the AC power cords that are available for the 2500 W AC-input power supply. The table includes references to power cord illustrations. Table A-20 Note All 2500 W power supply power cords are 14 feet (4.3 meters) in length. Note All 2500 W power supply power cords have an IEC60320/C19 appliance connector at one end.
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies 2700 W AC-Input and DC-Input Power Supplies The 2700 W AC-input power supply (PWR-2700-AC/4) and 2700 W DC-input power supply (PWR-2700-DC/4) are supported only in the Catalyst 6504-E switch. See Figure A-11 for the 2700 W AC-input power supply and Figure A-12 for the 2700 W DC-input power supply. Note The 2700 W AC-input power supply needs 220 VAC to deliver 2700 W of power.
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies Figure A-12 2700 W DC-Input Power Supply 1 Captive installation screw (4x) 7 Fixed cable guide, top half 2 Source DC terminal block 8 Detached cable guide, bottom half 3 Status LEDs 9 Tie-wrap (for source DC cables) 4 Terminal block cover 10 Fixed cable guide, bottom half 5 Detached cable guide, top half 11 Tie-wrap (for ground cable) 6 Ground terminal block Catalyst 6500 Series Switches Installation
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies 2700 W Power Supply Specifications Table A-22 lists the specifications for the 2700 W AC-input power supply. Table A-21 2700 W AC-Input Power Supply Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC). Note AC-input voltage AC-input current Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies.
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies Table A-21 2700 W AC-Input Power Supply Specifications (continued) Specification Description Power supply output • 100/120 VAC operation – 15 A @ +1.5 VDC – 2.5 A @ +3.3 VDC – 27.49 A @ +50 VDC • 200/240 VAC operation – 15 A @ +1.5 VDC – 2.5 A @ +3.3 VDC – 55.61 A @ +50 VDC Output holdup time kVA rating 1 20 ms minimum 3.4 KVA (high-line operation) Heat dissipation 11,238 BTU/hour (approx.) Weight 18.
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies Table A-22 2700 W DC-Input Power Supply Specifications (continued) Specification Power supply output Description • One DC input operation (1350 W operation) – 15 A @ +1.5 VDC – 5 A @ +3.3 VDC – 27.49 A @ +50 VDC • Two DC inputs operation (2700 W operation – 15 A @ +1.5 VDC – 5 A @ +3.3 VDC – 55.61 A @ +50 VDC DC input terminal block Accepts 2–14 AWG copper conductors.
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies Table A-23 2700 W AC-Input and DC-Input Power Supply LEDs LED Meaning INPUT 1 OK AC-input power supplies: INPUT 2 OK (DC-input power supply only) • Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. DC-input power supplies: FAN OK OUTPUT FAIL • Green—Source DC is OK. (Input voltage is –40.
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies 2700 W Power Supply AC Power Cords Table A-24 lists the specifications for the AC power cords that are available for the 2700 W AC-input power supply. The table includes references to power cord illustrations. Table A-24 Note All 2700 W power supply power cords are 14 feet (4.3 meters) in length. Note All 2700 W power supply power cords have an IEC60320/C19 appliance connector at one end.
Appendix A Power Supply Specifications 3000 W AC-Input Power Supply 3000 W AC-Input Power Supply The 3000 W AC-input power supply (WS-CAC-3000W) is supported in the following Catalyst 6500 series switches: • Catalyst 6506 • Catalyst 6506-E • Catalyst 6509 • Catalyst 6509-E • Catalyst 6509-NEB • Catalyst 6509-NEB-A • Catalyst 6509-V-E • Catalyst 6513 The 3000 W power supply (see Figure A-13) shares the same form factor as the 1000 W, 1300 W, 2500 W, 4000 W, and 6000 W AC-input power suppli
Appendix A Power Supply Specifications 3000 W AC-Input Power Supply 3000 W Power Supply Specifications Table A-25 lists the specifications for the 3000 W AC-input power supply. Table A-25 3000 W Power Supply Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC). Note AC-input voltage AC-input current Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies.
Appendix A Power Supply Specifications 3000 W AC-Input Power Supply Table A-25 3000 W Power Supply Specifications (continued) Specification Power supply output Description • 100/120 VAC operation – 25.0 A @ +3.3 V – 5 A @ +5 V – 12 A @ +12 V – 27.89 A @ +42 V • 200/240 VAC operation – 25.0 A @ +3.3 V – 5 A @ +5 V – 12 A @ +12 V – 65.98 A @ +42 V Front panel power connector A two-pin male Molex connector is located in the lower right corner of the power supply front panel.
Appendix A Power Supply Specifications 3000 W AC-Input Power Supply Table A-26 LED INPUT OK FAN OK OUTPUT FAIL 3000 W AC-Input Power Supply LEDs Meaning • Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. • Green—Power supply fan is operating properly. • Off—Power supply fan failure is detected. • Red—Problem with one or more of the DC-output voltages of the power supply.
Appendix A Power Supply Specifications 3000 W AC-Input Power Supply 3000 W Power Supply AC Power Cords Table A-27 lists the specifications for the AC power cords that are available for the 3000 W AC-input power supply. The table includes references to power cord illustrations. Table A-27 Note All 3000 W power supply power cords are 14 feet (4.3 meters) in length. Note All 3000 W power supply power cords have an IEC60320/C19 appliance connector at one end.
Appendix A Power Supply Specifications 4000 W AC-Input and DC-Input Power Supplies 4000 W AC-Input and DC-Input Power Supplies The 4000 W AC-input and DC-input power supplies, (WS-CAC-4000W-US, WS-CAC-4000W-INT, and PWR-4000-DC) are supported in the following Catalyst 6500 series switches: • Catalyst 6506 • Catalyst 6506-E • Catalyst 6509 • Catalyst 6509-E • Catalyst 6509-NEB • Catalyst 6509-NEB-A • Catalyst 6509-V-E • Catalyst 6513 The 4000 W AC-input and DC-input power supplies, shown in
Appendix A Power Supply Specifications 4000 W AC-Input and DC-Input Power Supplies Figure A-15 4000 W DC-Input Power Supply 4000 W Power Supply Specifications Table A-29 lists the specifications for the 4000 W AC-input power supply. Table A-28 4000 W AC-Input Power Supply Specifications Specification Description AC-input type High-line input with power factor correction (PFC). Note Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies.
Appendix A Power Supply Specifications 4000 W AC-Input and DC-Input Power Supplies Table A-28 4000 W AC-Input Power Supply Specifications (continued) Specification Description Branch circuit requirement Each chassis power supply should have its own dedicated, fused-branch circuit: • For North America—30 A • For International—Circuits should be sized according to local and national codes • All AC power supply inputs are fully isolated.
Appendix A Power Supply Specifications 4000 W AC-Input and DC-Input Power Supplies Table A-29 4000 W DC-Input Power Supply Specifications Specification DC-input voltage Description • –48 VDC @ 37 A for nominal –48 V battery backup system (operating range: –40.
Appendix A Power Supply Specifications 4000 W AC-Input and DC-Input Power Supplies Table A-30 4000 W AC-Input and DC-Input Power Supplies LEDs LED Meaning INPUT OK AC-input power supplies: • Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. DC-input power supplies: FAN OK OUTPUT FAIL • Green—Source DC voltage is OK. (Input voltage is –40.5 VDC or greater.
Appendix A Power Supply Specifications 6000 W AC-Input and DC-Input Power Supplies 4000 W Power Supply AC Power Cords Table A-31 lists the specifications for the AC power cords that are available for the 4000 W AC-input power supply. Included in the table are references to illustrations of the power cords.
Appendix A Power Supply Specifications 6000 W AC-Input and DC-Input Power Supplies Figure A-16 6000 W AC-Input Power Supply Figure A-17 6000 W DC-Input Power Supply Catalyst 6500 Series Switches Installation Guide OL-5781-07 A-47
Appendix A Power Supply Specifications 6000 W AC-Input and DC-Input Power Supplies 6000 W Power Supply Specifications Table A-34 lists the specifications for the 6000 W AC-input power supply. Table A-33 6000 W AC-Input Power Supply Specifications Specification Description AC-input type 2 AC-inputs per power supply. High-line input with power factor correction (PFC) included. Note AC-input voltage Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies.
Appendix A Power Supply Specifications 6000 W AC-Input and DC-Input Power Supplies Table A-33 6000 W AC-Input Power Supply Specifications (continued) Specification Description Branch circuit requirement Each power supply input should have its own dedicated, fused-branch circuit: • For North America—20 A • For International—Circuits should be sized according to local and national codes • All Catalyst 6500 series AC-input power supplies require single-phase source AC.
Appendix A Power Supply Specifications 6000 W AC-Input and DC-Input Power Supplies Table A-33 6000 W AC-Input Power Supply Specifications (continued) Specification Description Power supply output capacity The 6000 W power supply can operate at either 2900 W or 6000 W depending on the number of AC power cords attached and the source AC voltage.
Appendix A Power Supply Specifications 6000 W AC-Input and DC-Input Power Supplies Table A-33 6000 W AC-Input Power Supply Specifications (continued) Specification Description Power supply output capacity • 2900 W operation (one 220 VAC source or two 110 VAC sources) – 25 A @ +3.3 VDC – 12 A @ +12 VDC – 63.6 A @ +42 VDC • 6000 W operation (two 220 VAC sources) – 25 A @ +3.3 VDC – 12 A @ +12 VDC – 137.4 A @ +42 VDC Output holdup time kVA rating 20 ms minimum 1 7.
Appendix A Power Supply Specifications 6000 W AC-Input and DC-Input Power Supplies Table A-34 6000 W DC-Input Power Supply Specifications (continued) Specification Description Power supply output The 6000 W DC-input power supply can operate at either 2800 W, 4500 W, or 6000 W depending on the number of source DC power cables attached.
Appendix A Power Supply Specifications 6000 W AC-Input and DC-Input Power Supplies Table A-35 6000 W AC-Input and DC-Input Power Supply LEDs LED Meaning INPUT OK 1 and INPUT OK 2 • Green—Source voltage is OK. Input voltage is 85 VAC or greater. • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. • Green—Source DC voltage is greater than or equal to –40.5 VDC. • Off—Source DC voltage is less than or equal to –37.5 VDC.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Table A-36 6000 W Power Supply AC Power Cords (continued) Locale Power Cord Part Number AC Source Plug Type Cordset Rating Power Cord Reference Illustration Japan, North America (nonlocking plug) 200–240 VAC operation CAB-AC-2500W-US1= NEMA 6-20 16 A, 250 VAC Figure A-43 Japan, North America (locking plug) 200–240 VAC operation CAB-AC-C6K-TWLK= NEMA L6-20 16 A, 250 VAC Figure A-44 Japan, North America 100–120 VAC operati
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Note Because of the form-factor difference, when you install an 8700 W power supply in a Catalyst 6506, Catalyst 6509, or Catalyst 6509-NEB chassis you must relocate the system ground connection from the chassis ground pad connection to the two system ground studs located on the 8700 W power supply faceplate.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Table A-38 8700 W AC-Input Power Supply Specifications (continued) Specification Description AC-input current 16 A each input AC-input frequency 50/60 Hz (nominal) (±3% for full range) Branch circuit requirement Each power supply input should have its own dedicated, fused-branch circuit: • For North America—20 A • For International—Circuits should be sized according to local and national codes • All Catalyst 6500 series AC-
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Table A-38 8700 W AC-Input Power Supply Specifications (continued) Specification Description Power supply output capacity The power supply output capacity is dependent on the number of AC power cords (1, 2, or 3) attached and the source AC voltage (110 VAC [low-line] or 220 VAC [high-line]) applied to the power supply inputs.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Table A-38 8700 W AC-Input Power Supply Specifications (continued) Specification Power supply output Description • 2800 W operation – 25.0 A @ +3.3 VDC – 12.0 A @ +12 VDC – 61.29 A @ +42 VDC • 4200 W operation – 25.0 A @ +3.3 VDC – 12.0 A @ +12 VDC – 94.62 A @ +42 VDC • 5800 W operation – 25.0 A @ +3.3 VDC – 12.0 A @ +12 VDC – 132.71 A @ +42 VDC • 8700 W operation – 25.0 A @ +3.3 VDC – 12.0 A @ +12 VDC – 201.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Table A-39 8700 W AC-Input Power Supply LEDs LED Meaning INPUT OK 1, INPUT OK 2, and INPUT OK 3 • Green—Source voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. 220VAC 1, 2, and 3 • Green—High-line AC is present on the respective AC inputs. (Input voltage is 170 VAC or higher.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Remote Power Cycling Feature The 8700 W power supply is equipped with a remote power cycling feature that allows you to remotely turn on or turn off the power supply through an external relay controller box. Figure A-19 shows a typical remote power on/off setup.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Remote Power-Cycling Operation This feature allows you to remotely power cycle the Catalyst 6500 series switch using any appropriate third-party relay controller. This eliminates the need for you to have access to the supervisor engine console or CLI to control power cycling. Table A-40 lists the relay controller box relay type, the corresponding power supply terminal block positions, and a description of the power-cycling operation.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply 8700 W Power Supply AC Power Cords Table A-41 lists the specifications for the AC power cords that are available for the 8700 W AC-input power supply. Included in the table are references to illustrations of the power cords.
Appendix A Power Supply Specifications AC Power Cord Illustrations AC Power Cord Illustrations This section contains the AC power cord illustrations (see Figures A-19 through A-48). An AC power cord may be used with several power supplies. See the power supply specifications tables for the AC power cord illustrations that are applicable for your power supply.
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-22 CAB-AC10A-90L-IT= (Italy) Figure A-23 CAB-AC15A-90L-US= (Japan and United States) Figure A-24 CAB-AC10A-90L-UK= (United Kingdom) Catalyst 6500 Series Switches Installation Guide A-64 OL-5781-07
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-25 CAB-7KACR= (Argentina) Figure A-26 CAB-7KACA= (Australia and New Zealand) Figure A-27 CAB-7KACE= (Continental Europe) Catalyst 6500 Series Switches Installation Guide OL-5781-07 A-65
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-28 CAB-7KACI= (Italy) Figure A-29 CAB-7KAC-15= (Japan and United States) Figure A-30 CAB-7KACU= (United Kingdom) Catalyst 6500 Series Switches Installation Guide A-66 OL-5781-07
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-31 CAB-7513ACR= and CAB-IR2073-C19-AR= (Argentina) Figure A-32 CAB-7513ACA= (Australia and New Zealand) Figure A-33 CAB-7513ACE= (Continental Europe) Catalyst 6500 Series Switches Installation Guide OL-5781-07 A-67
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-34 CAB-AC-2500W-ISRL (Israel) Figure A-35 CAB-7513ACI= (Italy) Figure A-36 CAB-7513AC= (Japan and United States) Catalyst 6500 Series Switches Installation Guide A-68 OL-5781-07
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-37 CAB-AC16A-CH= (People’s Republic of China) Figure A-38 CAB-7513ACSA= (South Africa) Figure A-39 CAB-ACS-10= (Switzerland) Catalyst 6500 Series Switches Installation Guide OL-5781-07 A-69
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-40 CAB-7513ACU (United Kingdom) Figure A-41 CAB-AC-2500W-EU (Continental Europe) Figure A-42 CAB-AC-2500W-INT= (International) Catalyst 6500 Series Switches Installation Guide A-70 OL-5781-07
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-43 CAB-AC-2500W-US1= (Japan and United States) Figure A-44 CAB-AC-C6K-TWLK= (Japan and United States) Catalyst 6500 Series Switches Installation Guide OL-5781-07 A-71
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-45 CAB-ACS-16= (Switzerland) Figure A-46 CAB-AC-16A-AUS= (Australia and New Zealand) Figure A-47 CAB-C19-CBN= (PDU) Catalyst 6500 Series Switches Installation Guide A-72 OL-5781-07
Appendix A Power Supply Specifications Power Supply Redundancy Figure A-48 WS-CAC-4000W-INT= (International) Figure A-49 WS-CAC-4000W-US= (United States) Power Supply Redundancy Catalyst 6500 series switching modules have different power requirements. Depending upon the wattage of the power supply, certain switch configurations might require more power than a single power supply can provide.
Appendix A Power Supply Specifications Power Supply Redundancy Table A-42 Power Supply Redundancy If you have two power supplies of and redundancy is Then Equal wattage Enabled The total power drawn from both supplies is never greater than the capability of one supply. If one supply malfunctions, the other supply can take over the entire system load. Each power supply provides approximately half of the required power to the system.
Appendix A Power Supply Specifications Power Supply Redundancy Table A-43 Effects of Power Supply Configuration Changes (continued) Configuration Change Equal wattage power supply is inserted with redundancy disabled Higher wattage power supply is inserted with redundancy enabled Lower wattage power supply is inserted with redundancy enabled Higher or lower wattage power supply is inserted with redundancy disabled Power supply is removed with redundancy enabled Effect • System log and syslog messa
Appendix A Power Supply Specifications Power Supply Redundancy Table A-43 Effects of Power Supply Configuration Changes (continued) Configuration Change Effect System is booted with power supplies of different wattage installed and redundancy enabled • System log and syslog messages are generated. • The lower-wattage supply is disabled (Catalyst operating system). • For Cisco IOS, both power supplies come on. The total available wattage is the output wattage of the higher wattage power supply.
Appendix A Power Supply Specifications Power Supply Redundancy Note In systems that are equipped with two power supplies, if one power supply fails and the other power supply cannot fully power all of the installed modules, system power management will shut down devices in the following order: • Power over Ethernet (PoE) devices— The system will power down PoE devices in descending order, starting with the highest numbered port on the module in the highest numbered slot.
Appendix A Power Supply Specifications Power Supply Redundancy Catalyst 6500 Series Switches Installation Guide A-78 OL-5781-07
