Datasheet

15
Installing the New Power Supply
78-4519-04
Removing and Installing the Cisco AS5300 Power Supply
Step 2 First reconnect the 4-jack harness and then reconnect the 2-pin 12V connector, as shown in Figure 11.
Note For clarity, the illustration does not show the fans in place.
Caution Observe the proper keying of the DC output connector to the back panel connector. Never force the
connector, because you could damage your Cisco AS5300.
Figure 11 Reconnecting the Power Cables to the Backplane
Power supply
12V connector
Front panel
H10524
Power
connector
Backplane