Datasheet

18
Installing the New Power Supply
78-4519-04
Removing and Installing the Cisco AS5300 Power Supply
Step 6 Reinstall the remaining fan. Make sure that you orient the fan so that the cables feed to the right
(toward the second fan). Then route the cable completely under the fan before you reconnect it. This
takes up the extra length of fan cable and keeps it out of the way. (See Figure 14.)
Figure 14 Correct Fan Cable Routing
Step 7
Replace the air separator, holding all cables to the right of the separator as you slip it into the chassis.
(See Figure 15.)
Figure 15 Replacing the Air Separator
H10696
Front panel
H10525
Air separator