Datasheet

19
Replacing the Chassis Cover
78-4519-04
Removing and Installing the Cisco AS5300 Power Supply
Step 8 Turn the chassis so that you face the rear panel and reinstall the three mounting screws. (See
Figure 16.)
Figure 16 Replacing the Power Supply Mounting Screws
Step 9 If you installed a different type of power supply (AC or DC) than was originally installed in the access
server, place one of the power ratings labels that came in the plastic bag with the documentation
directly over the power ratings information on the rear panel. For example, if the original chassis came
with an AC power supply and you replaced it with a DC power supply, place the DC power ratings label
over the ratings stamped on the rear panel of the chassis. This ensures that the correct power ratings
information appears on the rear panel. (See Figure 17 and Figure 18.)
Step 10 Replace the chassis cover as described in the next section, “Replacing the Chassis Cover.”
Replacing the Chassis Cover
To replace the chassis cover, follow these steps:
Step 1 Place the chassis bottom so that the front panel is facing you.
Figure 17Power Ratings Label for DC Power Supply
INPUT 48 – 60V === 9 – 7A 300W
Figure 18Power Ratings Label for AC Power Supply
INPUT 100 – 240V~ 50/60Hz 2 – 5A
H10513
Power supply
Mounting
screws