Datasheet

27
Removing the Old Power Supply
78-4519-04
Removing and Installing the Cisco AS5350 Power Supply
Figure 27 Removing the Air Separator
Note There are two power connectors on the power supply. One connects to the backplane and the
other to the system board. (See Figure 28.)
Figure 28 Power Supply Connectors
Step 5
Disconnect both power supply connectors. Disconnect the backplane connector first, followed by the
system board connector. (See Figure 29.)
Power
supply
35692
3
Chassis bottom
Front panel
Power
supply
Backplane
connector
System board
connector
36016