Datasheet

38
Removing the Power Supply
78-4519-04
Removing and Installing the Cisco AS5400 Power Supply
Step 2 Remove the three mounting screws that secure the power supply to the chassis and set them aside. (See
Figure 42.)
Note Although the following illustrations show only the AC power supply, the procedures are the
same for the DC power supply.
Figure 42 Removing the Power Supply Mounting Screws
Step 3
Turn the chassis so that the front panel is facing you.
Step 4 Lift the air separator out of the chassis. (See Figure 43.)
Figure 43 Removing the Air Separator
14130
AC OK
DC OK
OTF
AC OK
DC OK
OTF
Mounting
screws
Power supply
Front panel
Air separator
H10514