Datasheet

Installing the Power Supply

78-4519-04

Removing and Installing the Cisco AS5400 Power Supply

Step 4 Route the fan cables as shown in Figure 52.

Note The two longest cables are connected to the two installed fans on the right. The connectors to

these two fans fit into the space between the second and third fans.

Caution Route the fan cables carefully to avoid pinching the cables near the bridge lance. (See Figure 52.)

Figure 52 Routing the Fan Cables

Step 5

Insert the second fan and press the fan into place between the sheet metal tabs. (See Figure 52.)

Note Make sure that the fan cable feeds to your left, and position the cables to the two installed fans

so that they fit under the first and second fans.

14134

Front panel

Sheet metal tabs

Bridge lance

Base tabs