Datasheet

Replacing the Chassis Cover

78-4519-04

Removing and Installing the Cisco AS5400 Power Supply

Replacing the Chassis Cover

To replace the chassis cover, follow these steps:

Step 1 Place the chassis bottom so that the front panel is facing you.

Step 2 Hold the chassis cover over the chassis bottom, and align each of the cover tabs with the chassis tabs at

the top rear of the chassis. (See Figure 57.)

Figure 57 Replacing the Chassis Cover

Step 3

Lower the front of the top cover to close the chassis, and ensure the following:

• The chassis cover tabs fit under the edge of the chassis rear panel so that they are not exposed.

• The chassis tabs fit under the chassis cover so that they are not exposed.

• The chassis cover side tabs on both sides fit inside the chassis side panels so that they are not

exposed.

When the chassis cover is properly assembled, no tabs are visible, as shown in Figure 58.

30853

Chassis bottom

Front panel

Chassis

tabs

Cover

tabs