Datasheet

Replacing the Chassis Cover

78-4519-04

Removing and Installing the Cisco AS5400 Power Supply

Figure 58 Cisco AS5400 Chassis

Step 4

Secure the chassis cover with four screws. (See Figure 57.)

Step 5 Reinstall the chassis on a rack, desktop, or table.

Step 6 Reinstall all interface cables.

Step 7 Reconnect the AC power cords. Or, if you are using a DC-powered unit, refer to Figure 59, and complete

Steps a through d.

Warning

The illustration shows the DC power supply terminal block. Wire the DC power supply using the

appropriate wire terminations at the wiring end, as illustrated. The proper wiring sequence is ground

to ground, return to return, and negative to negative. Note that the ground wire should always be

connected first and disconnected last. To see translations of the warnings that appear in this

publication, refer to the Regulatory Compliance and Safety Information document that accompanied

this device.

Figure 59 DC Power Supply Connections

29023

On/off

switch

LEDs

31628

Terminal

block

Mounting screwMounting screw

Mounting

screw

IN OK

DC OK

OTF