Getting Started Guide
Table Of Contents
- Cisco Catalyst 9120AX Series Access Points
- 1 About this Guide
- 2 About the Access Point
- 3 Safety Instructions
- 4 Unpacking
- 5 AP Views, Ports, and Connectors
- 6 Preparing the AP for Installation
- 7 Installation Overview
- 8 Performing a Pre-Installation Configuration
- 9 Mounting the Access Point
- 10 Grounding the Access Point
- 11 Powering the Access Point
- 12 Configuring and Deploying the Access Point
- 13 Self-Identifying Antennas
- 14 Checking the Access Point LEDs
- 15 Miscellaneous Usage and Configuration Guidelines
- 16 FAQs
- 17 Related Documentation
- 18 Declarations of Conformity and Regulatory Information
- Manufacturers Federal Communication Commission Declaration of Conformity Statement
- VCCI Statement for Japan
- Guidelines for Operating Cisco Catalyst Access Points in Japan
- Statement 371—Power Cable and AC Adapter
- Industry Canada
- Canadian Compliance Statement
- European Community, Switzerland, Norway, Iceland, and Liechtenstein
- Declaration of Conformity for RF Exposure
- Generic Discussion on RF Exposure
- This Device Meets International Guidelines for Exposure to Radio Waves
- This Device Meets FCC Guidelines for Exposure to Radio Waves
- This Device Meets the Industry Canada Guidelines for Exposure to Radio Waves
- Cet appareil est conforme aux directives internationales en matière d'exposition aux fréquences radioélectriques
- Additional Information on RF Exposure
- Administrative Rules for Cisco Catalyst Access Points in Taiwan
- Operation of Cisco Catalyst Access Points in Brazil
- Declaration of Conformity Statements
- Communications, Services, and Additional Information
- Cisco Bug Search Tool
30
Cisco Catalyst 9120AX Series Access Points
ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types
d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits
pour l'exploitation de l'émetteur.
Table 4 List of Internal Antennas Supported on C9120AXI
Antenna Type Antenna Gain Antenna Impedance
Single-band Omni 3 dBi 50 ohms
Dual-band Omni 3/5 dBi 50 ohms
Dual-band Omni 4/5 dBi 50 ohms
Single-Band HPOL 5 dBi 50 ohms
Table 5 List of External Antennas Supported on C9120AXE and C9120AXP
Part Number Description Gain
AIR-ANT2524DB-R/= Dipole Antenna, Black, with RP-TNC connectors. 2 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2524DG-R/= Dipole Antenna, Gray, with RP-TNC connectors. 2 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2524DW-R/= Dipole Antenna, White, with RP-TNC connectors. 2 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2524DW-RS= Dipole Self-Identifying Antenna, White, with RP-TNC
connectors.
2 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2524V4C-R= Ceiling Mount Omni Antenna, 4-port, with RP-TNC
connectors.
2 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2524V4C-RS= Ceiling Mount Omni Self-Identifying Antenna, 4-port,
with RP-TNC connectors.
2 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2535SDW-R= Low Profile Antenna, White, with RP-TNC connectors. 3 dBi (2.4 GHz)
5 dBi (5 GHz)
AIR-ANT2535SDW-RS= Low Profile Self-Identifying Antenna, White, with RP-TNC
connectors.
3 dBi (2.4 GHz)
5 dBi (5 GHz)
AIR-ANT2544V4M-R= Wall Mount Omni Antenna, 4-port, with RP-TNC
connectors.
4 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2544V4M-RS= Wall Mount Omni Self-Identifying Antenna, 4-port, with
RP-TNC connectors.
4 dBi (2.4 GHz)
4 dBi (5 GHz)
AIR-ANT2566D4M-R= 60° Patch Antenna, 4-port, with RP-TNC connectors. 6 dBi (2.4 GHz)
6 dBi (5 GHz)
AIR-ANT2566D4M-RS= 60° Patch Self-Identifying Antenna, 4-port, with RP-TNC
connectors.
6 dBi (2.4 GHz)
6 dBi (5 GHz)
AIR-ANT2566D4M-DS= 60° Patch Self-Identifying Antenna, 4-port, with 4DART
connector.
6 dBi (2.4 GHz)
6 dBi (5 GHz)
AIR-ANT2566P4W-DS= Directional Self-Identifying Antenna, 4-port, with 4DART
connector.
6 dBi (2.4 GHz)
6 dBi (5 GHz)
AIR-ANT2566P4W-R= Directional Antenna, 4-port, with RP-TNC connector. 6 dBi (2.4 GHz)
6 dBi (5 GHz)
AIR-ANT2566P4W-RS= Directional Self-Identifying Antenna, 4-port, with
RP-TNC connectors.
6 dBi (2.4 GHz)
6 dBi (5 GHz)
AIR-ANT2513P4M-N= Patch Antenna, 4-port, with N connectors.
(Supported on the 9120AXP model only.)
13 dBi (2.4 GHz)
13 dBi (5 GHz)