User Manual

Administering Your Cisco RV110W
Setting the Session Timeout Value
Cisco RV110W Administration Guide 119
7
Setting the Session Timeout Value
The timeout value is the number of minutes of inactivity that are allowed before the
Device Manager session is ended. You can configure timeout for the Admin and
Guest accounts.
To configure session timeout:
STEP 1 Choose Administration > Session Timeout.
STEP 2 In the Administrator Inactivity Timeout field, enter the number, in minutes, before
a session times out due to inactivity. Choose never to allow the administrator to
stay logged in permanently.
STEP 3 In the Guest Inactivity Timeout field, enter the number, in minutes, before a
session times out due to inactivity. Choose never to allow the administrator to stay
logged in permanently.
STEP 4 Click Save.
Configuring Simple Network Management (SNMP)
Simple Network Management Protocol (SNMP) lets you monitor and manage your
router from an SNMP manager. SNMP provides a remote means to monitor and
control network devices, and to manage configurations, statistics collection,
performance, and security.
Configuring SNMP System Information
In the SNMP System Information section of the SNMP page, you can enable
SNMP.
Before you can use SNMP, install SNMP software on your computer. The
Cisco RV110W supports only SNMPv3 for SNMP management. The
Cisco RV110W supports SNNPv1/2/3 for SNMP trap messages.