User Manual
Table Of Contents
- Introduction
- Configuring Networking
- Configuring the Wireless Network
- Configuring the Firewall
- Configuring VPN
- Configuring Quality of Service (QoS)
- Administering Your Cisco RV110W
- Setting Password Complexity
- Configuring User Accounts
- Setting the Session Timeout Value
- Configuring Simple Network Management (SNMP)
- Using Diagnostic Tools
- Configuring Logging
- Configuring Bonjour
- Configuring Date and Time Settings
- Backing Up and Restoring the System
- Upgrading Firmware or Change the Language
- Restarting the Cisco RV110W
- Restoring the Factory Defaults
- Running the Setup Wizard
- Viewing the Cisco RV110W Status
- Using Cisco QuickVPN
- Where to Go From Here
Cisco RV110W Administration Guide 3
Contents
Chapter 1: Introduction 8
Product Overview 8
Getting to Know the Cisco RV110W 10
Front Panel 10
Back Panel 12
Installing the Cisco RV110W 13
Placement Tips 13
Connecting the Equipment 13
Using the Setup Wizard 15
Using the Getting Started Page 16
Navigating through the Pages 18
Saving Changes 19
Viewing the Help Files 19
Configuration Next Steps 20
Verifying the Hardware Installation 20
Connecting to Your Wireless Network 21
Chapter 2: Configuring Networking 22
Configuring the WAN Settings 22
Configuring Automatic Configuration (DHCP) 22
Configuring Static IP 23
Configuring PPPoE 23
Configuring PPTP 25
Configuring L2TP 26
Configuring Optional Settings 28
Configuring the LAN Settings 29
Changing the Default Cisco RV110W IP Address 30
Configuring DHCP 31
Configuring VLANs 32
Configuring Static DHCP 34
Viewing DHCP Leased Clients 35