Quick Start Guide

Cisco RV160W Router Quick Start Guide 5
Back Panel
WIFI — Push the button to enable or disable the WIFI.
RESET — The RESET button has two functions:
• To reboot the unit and retain the current configuration, press
and hold RESET for a least 3 but no more than 10 seconds, by
using a paper clip or a pen tip.
• To reboot the unit and restore the factory default configuration,
press and hold the RESET button for more than 10 seconds.
Changes you have made to the router are lost.
Console Port — The router console port is designed for a serial cable
connection to a terminal or a computer that is running a terminal emulation
program.
LAN — (1-4) RJ-45 device connections to link local area network devices,
such as PCs, print servers, or switches to the router.
WAN — Connecting the router to a wide area network device such as a
cable or DSL modem.
SFP Port — A small factor-form pluggable (SFP) is a hot-swappable input/
output device that plugs into the SFP port, linking the port with the
network.
WLAN 5GHz
Off when the 5GHz wireless module is disabled.
Flashing green when the wireless radio is
transmitting or receiving data.
Solid green when the 5GHz wireless module is
enabled.
USB
Off when the USB is not connected, or the USB
is inserted and not recognized.
Solid green when USB storage is recognized.
Flashing green when transmitting or receiving data.
Amber when the USB storage access has errors.