Specifications

2-141
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
disable
Usage Guidelines Use this command with the level argument to lower the user privilege level, as illustrated in Figure 2-1.
If a level is not specified, it defaults to User mode.
Figure 2-1 Disable Command
Note that you must exit to Privileged EXEC command mode to use this command.
Authorization: user
Examples The following example shows how to change from root to admin mode:
SCE8000>enable 15
Password:<cisco>
SCE8000#>disable 10
SCE8000#
Related Commands
User Authorization Level (0)
User Exec Mode
Disable
Disable
Disable
Disable
Viewer Authorization Level (5)
User Exec Mode
Admin Authorization Level (10)
Privileged Exec Mode
Root Authorization Level (15)
Privileged Exec Mode
157243
Command Description
enable Allows the user to access a higher authorization level.