Specifications

2-438
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
show interface linecard counters
show interface linecard counters
Displays the hardware counters for the line card interface.
show interface linecard slot-number counters [bandwidth] [cpu-utilization]
Syntax Description
Command Default None
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: viewer
Examples The following example shows how to display the hardware counters for the line card interface:
SCE8000>enable 5
Password:<cisco>
SCE8000>show interface linecard 0 counters
DP packets in: 340
DP packets out: 340
DP IP packets in: 340
DP Non-IP packets: 0
DP IP packets checksum err: 0
DP IP packets length err: 0
DP IP broadcast packets: 0
DP IP fragmented packets: 0
DP IP packets with TTL=0 err: 0
DP Non TCP/UDP packets: 0
DP TCP/UDP packets checksum err: 0
DP ARP packets: 0
DP PPP compressed packets: 0
DP packets dropped: 0
DP tuples to FF: 340
DP tuples from CLS: 340
DP L7 Filter congested packets: 0
DP VLAN packets: 0
DP MPLS packets: 0
DP parse errors: 0
DP IPinIP skipped packets: 0
slot-number Number of the identified slot. Enter a value of 0.
bandwidth Displays only the bandwidth counters.
cpu-utilization Displays only the CPU-utilization counters.
Release Modification
2.5.7 This command was introduced.