Specifications

2-642
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
snmp-server contact
snmp-server contact
Sets the system contact (sysContact) string.
To remove the contact setting, use the no form of this command.
snmp-server contact contact
no snmp-server contact
Syntax Description
Command Default None
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: admin
Examples The following example shows how to configure the system contact:
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#snmp-server contact [e-mail]
SCE8000(config)#
Related Commands
contact Sring that identifies the system contact.
Release Modification
2.5.7 This command was introduced.
Command Description
show snmp contact Displays the configured system contact string.