Specifications

2-688
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
subscriber TP-IP-range import csv-file
subscriber TP-IP-range import csv-file
To import IPv4 and IPv6 ranges for a Traffic Processor or to remove subscriber mappings in IPv4 or IPv6
ranges, use the subscriber TP-IP-range import csv-file command.
subscriber TP-IP-range import csv-file csv-file-name [remove-subscriber-mappings]
Syntax Description
Command Default None.
Command Modes Interface Linecard Configuration (configif #)
Command History This table includes the following release-specific history entries:
Usage Guidelines The range details are imported incrementally in relationg to already existing IPv4 and IPv6 ranges. You
can use the command to remove the subscriber mappings in any of IPv4 or IPv6 ranges. You can also
use this command to prevent adding or updating of any of the IPv4 or IPv6 ranges that have any matching
subscriber mappings.
Authorization: admin
csv-file-name Name of the csv file.
remove-subscriber-ma
ppings
Specifies to remove the existing subscriber mappings.
Release Modification
3.8.0 This command was introduced.