Datasheet

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 7
Figure 1. Cisco 110 Series Unmanaged Switches
Features
Cisco 110 Series switches provide an easy-to-use solution for your small business network. They offer:
●
Ease of use: Cisco 110 Series switches work right out of the box, with no software to install and nothing to
configure. Each switch port independently sets itself for the optimal speed and determines whether to run in
half- or full-duplex mode automatically. As a standards-based Cisco solution, Cisco 110 Series switches are
also designed to immediately accommodate all of the devices in your network, including:!
– Support for 10 megabits per second (Mbps), 100 Mbps, and up to 1 gigabit per second (1000 Mbps)
devices in the same network!
– Automatic cable detection, so you don't have to worry about using the wrong cable type!
– Compatibility with network devices from other vendors!
●
Simple setup: Designed for small office spaces, Cisco 110 Series switches are available in both compact
desktop and rack-mount models. The desktop models offer a wall-mount option for discreet mounting under
a desk or on the wall of an office or conference room.!
●
High performance: Cisco 110 Series switches deliver the performance you need to run your business
applications - including bandwidth-intensive video services - and avoid slow and sluggish networks. It
supports up Gigabit Ethernet speeds, unlocking a new level of capacity and performance in your business
network and letting you transfer large files in seconds.!
●
Reduced energy costs: Cisco 110 Series switches are designed to help conserve energy by optimizing
power use without compromising performance, which protects our environment and reduces your energy
costs. In addition, they support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces
energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep
state during quiet periods. Most of the switches have no fans, so they run silently and unobtrusively while
lowering energy costs.!
●
Power-over-Ethernet: Cisco 110 Series switches are available with PoE ports on both Fast Ethernet and
Gigabit Ethernet models. This capability simplifies the deployment of IP telephony, wireless, video
surveillance, and other solutions by allowing you to connect and power network endpoints over a single