Datasheet

ManualsBrandsCisco ManualsNetworkingSF300-24PP-K9-EU

Data Sheet

Feature Description

Private MIBs (continued) CISCOSB-dhcp-MIB

CISCOSB-dlf-MIB

CISCOSB-dnscl-MIB

CISCOSB-embweb-MIB

CISCOSB-fft-MIB

CISCOSB-file-MIB

CISCOSB-greeneth-MIB

CISCOSB-interfaces-MIB

CISCOSB-interfaces_recovery-MIB

CISCOSB-qosclimib-MIB

CISCOSB-digitalkeymanage-MIB

CISCOSB-tbp-MIB

CISCOSMB-MIB

CISCOSB-secsd-MIB

CISCOSB-draft-ietf-entmib-sensor-MIB

CISCOSB-draft-ietf-syslog-device-MIB

CISCOSB-rfc2925-MIB

Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events)

for enhanced traffic management, monitoring, and analysis

IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration

Firmware upgrade

●

Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH

●

Upgrade can be initiated through console port as well

●

Dual images for resilient firmware upgrades

Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON

probe. Up to 8 source ports can be mirrored to one destination port. A single session is supported.

VLAN mirroring Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe.

Up to 8 source VLANs can be mirrored to one destination port. A single session is supported.

DHCP (Options 12, 66, 67, 82,

129, and 150)

DHCP Options facilitate tighter control from a central point (DHCP server) to obtain IP address,

auto-configuration (with configuration file download), DHCP relay, and hostname.

Secure Copy (SCP) Securely transfer files to and from the switch

Autoconfiguration with Secure

Copy (SCP) file download

Enables secure mass deployment with protection of sensitive data

Text-editable config files Config files can be edited with a text editor and downloaded to another switch, facilitating easier

mass deployment

Smartports Simplified configuration of QoS and security capabilities

Auto Smartports Applies the intelligence delivered through the Smartport roles and applies it automatically to the port

based on the devices discovered over CDP or LLDP-MED. This facilitates zero touch deployments.

Textview CLI Scriptable command-line interface. A full CLI as well as a menu-based CLI is supported. User

privilege levels 1, 7, and 15 is supported for the CLI.

Cloud services Support for Cisco Small Business FindIT Network and Cisco OnPlus

Localization Localization of GUI and documentation into multiple languages

Other management Traceroute; single IP management; HTTP/HTTPS; SSH; RADIUS; port mirroring; TFTP upgrade;

DHCP client; BOOTP; SNTP; Xmodem upgrade; cable diagnostics; ping; syslog; Telnet client (SSH

secure support)

Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up)

Power Efficiency

EEE Compliant (802.3az) Supports 802.3az on all copper ports (SG300 models)

Energy Detect Automatically turns off power off on Gigabit Ethernet and 10/100 RJ-45 port when detecting link

down

Active mode is resumed without loss of any packets when the switch detects the link up

Cable length detection Adjusts the signal strength based on the cable length for Gigabit Ethernet models. Reduces the

power consumption for cables shorter than 10m.

Disable port LEDs LEDs can be manually turned off to save on Energy

General

Jumbo frames Frame sizes up to 9K (9216) bytes supported on 10/100 and Gigabit interfaces

MAC table Up to 16K (16384) MAC addresses

Discovery

Bonjour The switch advertises itself using the Bonjour protocol.

Link Layer Discovery Protocol

(LLDP) (802.1ab) with LLDP-

MED extensions

LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring

devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the

extensions needed for IP phones.