Datasheet

Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 10
Features Descriptions
Protocols Circuit Emulation
●
IETF RFC 4553 (SAToP PWE)
●
IETF draft-ietf-pwe3-cesopsn-07 (CESoPSN PWE)
ATM
●
IETF RFC 2684 (updated RFC 1483) support for multiple protocol
encapsulations over ATM
●
IETF RFC 2364 and 2516 for Point-to-Point Protocol (PPP) over ATM
●
IETF RFC 1577 support for classical IP and Address Resolution Protocol
(ARP) over ATM
●
ATM Forum User-Network Interface (UNI) 3.0, 3.1, and 4.0
Features and functions Circuit Emulation
●
MPLS encapsulation for CESoPSN and SAToP PWE transport
●
320 ms jitter buffer
●
T1/E1 and nxDS0 CEoP PWEs
●
Maximum of 24 T1/ E1 or J1 ports or 191 nxDS0 groups
●
Jitter and wander compliant to G.823/G.824 traffic interface
●
synchronous, differential or adaptive clock recovery modes
●
Targets 15ppb or better adaptive clock recovery accuracy
●
BITS support
●
Configurable clock source
ATM
●
CBR
●
VBR-nrt
●
VBR-rt
●
UBR and UBR+
●
Maximum virtual circuits: 2,000 (subject to overall configuration
limitations)
●
ATM and IP CoS
●
Per-virtual circuit and per-virtual path traffic shaping
●
Per-virtual circuit and per-virtual path statistics
●
PWE3 support
●
ATM permanent virtual circuits (PVCs) and switched virtual circuits
(SVCs)
●
F4 and F5 OAM cell support
●
Interim Local Management Interface (ILMI) 1.0
●
Layer 2 transport and Layer 3 termination on the same port
●
ATM over MPLS
●
IMA