DIGITAL PHONES ® DIGITAL BUSINESS USER GUIDE .
WHAT’S INSIDE CHAPTER 1 OVERVIEW OF YOUR CISCO DIGITAL PHONE 3 CHAPTER 2 INSTALLING CISCO SPA502 OR CISCO SPA504 4 CHAPTER 3 INSTALLING CISCO SPA525G2 5 CHAPTER 4 BLUETOOTH ON THE CISCO SPA525G2 7 © Telstra Corporation Limited (ABN 33 051 775 556) 2013. All rights reserved. This work is copyright. Apart from any use as permitted under the Copyright Act 1968, information contai ned within this manual cannot be used for any other purpose other than the purpose for which it was released.
CHAPTER 1 OVERVIEW OF THE CISCO SPA SERIES DIGITAL PHONE Navigation key, to select menu items Using the Directory Message Light Type the complete or partial name of the contact you wish to call 3. Use the Navigation key to move up or down the results and highlight the desired contact 4. Once you select a contact use the right arrow key to select the phone number – business or mobile 5.
CHAPTER 2 INSTALLING CISCO SPA502 OR CISCO SPA504 Connecting your phone Turn your phone over to expose the ports on the back of the unit Connect one end of the power cord into the power socket at the back of the phone. Make sure the power source is switched OFF, and then connect the other end of the power cord into the power socket. Switch the power source ON. After a few moments a small phone icon will be displayed on the top right hand corner of the phone’s LCD screen.
CHAPTER 3 INSTALLING CISCO SPA525G2 The Cisco SPA525G2 offers the option to be connected to the Digital Business Router using WiFi (Wireless Network) or an Ethernet Cable (Wired Network). Selecting the WiFi eliminates the need to for cabling, reducing cost and clutter around the office. Note: the voice call quality will depend on strength and quality of the WiFi connection between the router and the phone.
On your phone press the Select soft key to locate and connect to the router. This can take up to 1 minute Press OK From the Wi-Fi configuration menu select Wireless Status Setting up your profile The user profile must be set-up before you can use the phone. Press the Login soft key (figure 1) Enter the User ID and Password (obtain this information from the Configuration Summary email received from Telstra) using the number pad.
CHAPTER 4 BLUETOOTH ON THE CISCO SPA525G2 A mobile phone or wireless headset with Bluetooth can be paired to the Cisco SPA525G2. Pairing a Bluetooth wireless headset to the SPA525G2 allows you answer calls on your headset and be mobile around the office. Pairing a mobile phone to the SPA525g2 allows you import all contacts to your SPA525G2, answer calls to the SPA525G2 on your mobile phone and transfer a call to the mobile phone midway through a conversation.
NEED MORE SUPPORT If you have questions beyond this guide, we want to help. To learn more about your Digital Business tools and features, visit the Digital Business Online Support page at http://www.telstra.com/digitalbusiness/support To speak with a Digital Business consultant, phone us on 13 2000 and say “Digital Business” when prompted. When calling, please have your Account Number or phone number, including area code, ready for the consultant.
