User guide

11
Cisco TelePresence PrecisionHD Camera PrecisionHD Camera User guide
D14640.04 PrecisionHD 1080p-720p Camera User Guide, July 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Codec C90 congurations
Using the camera with Codec C90
Basic setup
Connect the HDMI cable:
• From the HD VIDEO OUT (HDMI) connector on the camera.
• To the HDMI 1 (HDMI ) connector on the Codec C90.
Connect the camera control cable:
• From the CODEC CONTROL IN (RJ45) connector on the
camera.
• To the CAMERA CONTROL (RS–232) connector on the
Codec C90. Visca™ protocol is supported.
Other congurations
The HDMI <1..4> and HD-SDI <1..4> connectors can be
used for the camera. The HDMI and HD-SDI can be used
simultanously.
Connect the HD-SDI cable:
• From the HD-VIDEO OUT (HD-SDI) connector on the
camera.
• To the HD-SDI <1..4> connector on the Codec C90.
Camera
control
HDMI 1
1
1
Output connector
Input connector
Codec connectors
HD-SDI
Contents
Appendices
Introduction
The physical interface
Connecting the camera
Video output formats
Daisy chaning
Connecting the camera