User guide

7
Cisco TelePresence PrecisionHD Camera PrecisionHD Camera User guide
D14640.04 PrecisionHD 1080p-720p Camera User Guide, July 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
The PrecisionHD 1080p 4X camera
The orange LED illuminates while in
a call and ickers when there is an
incoming call.
The green LED is continuously
illuminated when power is On,
but it ickers when receiving
signals from the remote control.
USB
HDMI
Video Out
Power
Supply
Camera
Control
USB
• For future use.
HDMI video out
• HDMI is the video out source.
• Maximum resolution is 1080p30/720p60.
Power
• Use the supplied power adapter when connecting the
power.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Daisy-chain control is not supported. The camera can be
used in a chain of multiple cameras but must be the last
camera in the chain.
Kensington lock
The Kensington lock may be used to prevent the camera to
be moved from its place or to prevent theft.
Kensington lock
The Quick Set C20 is shipped with the PrecisionHD
1080p 4X camera.
NOTE: The early shipments of the Quick Set C20
came with an interim version of the PrecisionHD
1080p 4X camera (the PrecisionHD 1080p 4X*
camera).
* Available for a limited period of time. See the “Technical
specications” on page 27 section for details.
Contents
Appendices
Introduction
The physical interface
Connecting the camera
Video output formats
Daisy chaning
The physical interface