Datasheet

Cisco UCS B420 M3 Blade Server
CONFIGURING the SERVER
23
STEP 8 ORDER INTERNAL USB 2.0 DRIVE (OPTIONAL)
You may order one optional internal USB 2.0 drive. The USB drive ordering information is listed
in
Table 13.
See Figure 5 on page 35 for the location of the USB connector.
Table 13 USB 2.0 Drive
Product ID (PID) PID Description
UCS-USBFLSH-S-4GB 4GB Flash USB Drive (shorter length) for all M3 servers
NOTE: A clearance of 0.950 inches (24.1 mm) is required for the USB device to be
inserted and removed (see the following figure).
NOTE: When the Cisco 4GB USB key is purchased with a server, it is pre-installed
into the internal USB port and held firmly in place with a clip to protect it from
shock and vibration during shipment and transportation. This clip also prevents the
USB key from undergoing shock and vibration during ongoing customer operational
use.