Datasheet

Cisco UCS C240 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)

CONFIGURING the SERVER

Supercapacitor Option

UCS-RAID-CV-SC= LSI CacheVault Power Module. This is a spare supercapacitor. It is the exact

same supercapacitor that ships with the 9271CV-8i, 9285CV-8e, and 9286CV-8e

cards listed earlier in this table and can be used as a replacement or upgrade

part.

RAID Configuration Options (not available for embedded RAID)

R2XX-SRAID0 Enable Single Disk Raid 0 Setting (for the following PIDs only):

■ UCS-RAID9271-8i or UCS-RAID9271CV-8I

■ UCSC-RAID-11-C240

■ UCSC-RAID-MZ-240

R2XX-RAID0 Factory preconfigured RAID striping option

Enable RAID 0 Setting. Requires a minimum of one hard drive.

R2XX-RAID1 Factory preconfigured RAID mirroring option

Enable RAID 1 Setting. Requires exactly two drives with the same size, speed,

capacity.

R2XX-RAID5 Factory preconfigured RAID option

Enable RAID 5 Setting. Requires a minimum of three drives of the same size,

speed, capacity.

R2XX-RAID6 Factory preconfigured RAID option

Enable RAID 6 Setting. Requires a minimum of four drives of the same size,

speed, capacity.

R2XX-RAID10 Factory preconfigured RAID option

Enable RAID 10 Setting. Requires a even number of drives (minimum of four

drives) of the same size, speed, capacity.

Notes . . .

1. The 9285CV-8e supports PCI Express Gen 2

9271-8i, 9271CV-8i, 9286CV-8e, and Cisco Nytro MegaRAID 200 GB support PCI Express Gen 3.

NOTE: The 9266CV-8i and 9285CV-8e RAID controllers will reach end-of-life (EOL) in

November, 2013. After then, they will no longer be available.

NOTE: Although RAID levels 50 and 60 are not orderable from the factory, they are

supported for selected controllers as shown in

Table 6 on page 23

Table 8 Available PCIe RAID Controller Options (continued)

Product ID (PID) PID Description