Specifications

5-66
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 5 Configuring System Components
Configuring Historical Reporting
Configuring the Database Purge Schedule
Use the purge schedule command in historical reporting database configuration mode to update the
daily schedule for automatic purging of historical data.
A daily purge starts at the time of day specified (in hours:minutes 24-hour format). Stored data that is
older than that specified in the days-to-keep value (in days) is purged from the database starting daily at
the time specified.
The default purge schedule is set at 04:00.
Note Because the purging of historical data on the module is resource-intensive, we recommend that the purge
be scheduled to run during off-peak hours.
The default number of days is 90 for the AIM-CUE/AIM2-CUE and 365 for the NM-CUE-EC,NM-CUE,
NME-CUE, ISM-SRE-300-K9, SM-SRE-700-K9, SM-SRE-710-K9, SM-SRE-900-K9, and
SM-SRE-910-K9 modules. The maximum value you can specify for days-to-keep is summarized in
Table 5-3. The no and default form of this command sets the purge scheduled time to 04:00, and the
number of days to the default value for that particular system hardware module.
Prerequisites
Cisco Unity Express 3.0 or a later version
SUMMARY STEPS
1. config t
2. ccn reporting historical
3. purge schedule time hh:mm days-to-keep days
4. end
5. show ccn reporting historical
Table 5-3 Maximum Days-to-Keep Value
Database Storage Limits
AIM-CUE/AIM2-CUE 90 days or database 90% full
NM-CUE-EC, NM-CUE, NME-CUE,
ISM-SRE-300-K9
SM-SRE-700-K9
SM-SRE-710-K9
SM-SRE-900-K9
SM-SRE-910-K9
365 days or database 90% full