Specifications

6-10
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 6 Configuring Users and Groups
Adding and Modifying a Group
Configuration mode:
Examples
The following example adds an owner and two members to the group sales and assigns sales a phone
number:
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
Enters configuration mode.
Step 2
groupname groupid [member username | owner ownername |
phonenumber phone-number | phonenumberE164 full-number |
privilege privilege-id]
Example:
se-10-0-0-0(config)# groupname sales member user1
se-10-0-0-0(config)# groupname sales owner user2
se-10-0-0-0(config)# groupname sales phonenumber 50163
se-10-0-0-0(config)# groupname sales phonenumberE164
14445550163
se-10-0-0-0(config)# groupname sales privilege
ManagePrompts
Creates the group with the groupid value. The
optional parameters configure more information for
the user:
• member—Associates an existing subscriber as a
member of this group. Repeat this command to
assign multiple subscribers to the group.
• owner—Specifies the owner of the group. The
owner is not considered a member. If the owner
is to have access to the group’s voice mailbox,
also assign the owner as a member.
• phonenumber—Associates a number or
extension with this group. No spaces or dashes
are allowed.
• phonenumberE164—Associates a telephone
number and area code with this group. No spaces
or dashes are allowed.
• privilege—Specifies the privilege level for the
group. Members assigned to this group have the
designated privilege rights.
Step 3
exit
Example:
se-10-0-0-0(config)# exit
Exits configuration mode.
Step 4
show groups
or
show group detail groupname groupid
Example:
se-10-0-0-0# show group detail groupname sales
Displays a list of group IDs for all configured groups.
This command does not display the details for the
groups.
Displays the detailed configuration information for
the group groupid value.
Step 5
copy running-config startup-config
Example:
se-10-0-0-0# copy running-config startup-config
Copies the configuration changes to the startup
configuration.