Specifications

7-24
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 7 Configuring Voice Mail
Configuring System-Wide Voice-Mail Parameters
Step 5
voicemail default {broadcast expiration time days |
expiration time days | language xx_YY
| mailboxsize
mailboxsize-seconds |
messagesize messagesize-seconds}
Example:
se-10-0-0-0(config)# voicemail default broadcast
expiration time 15
se-10-0-0-0(config)# voicemail default expiration time
30
se-10-0-0-0(config)# voicemail default language en_ENU
se-10-0-0-0(config)# voicemail default mailboxsize 300
se-10-0-0-0(config)# voicemail default messagesize 120
Assigns default values for new individual or
general delivery mailboxes. Later these values can
be configured to other values for specific
mailboxes.
• broadcast expiration time days—Sets the
number of days for which a broadcast
message can be saved on the system.
• expiration days—Sets the number of days for
which a message can be stored in a mailbox
before the voice-mail system deletes it.
• language—Specifies the default language
used for voice-mail prompts on the local
Cisco Unity Express system. See the
Release
Notes for Cisco Unity Express for a list of
available languages.
• mailboxsize mailboxsize-seconds—Sets the
maximum number of seconds for storing
messages in a mailbox.
• messagesize messagesize-seconds—Sets the
maximum number of seconds for a caller’s
message stored in a mailbox.
Step 6
voicemail operator telephone tel-number
Example:
se-10-0-0-0(config)# voicemail operator telephone 9000
Assigns the tel_number value as the voice-mail
operator’s extension. A mailbox owner dials this
extension while in the voice-mail system to reach
the voice-mail operator. Do not assign this
extension to a group. This extension need not be
the same as the auto-attendant operator extension.
Step 7
voicemail recording time seconds
Example:
se-10-0-0-0(config)# voicemail recording time 300
Assigns the time value in seconds as the maximum
recording time for any greeting or message in the
voice-mail system. Valid values are 10 to 3600
seconds. The default value is 900 seconds.
Step 8
voicemail callerid
Example:
se-10-0-0-0(config)#voicemail callerid
Enables playing caller ID information for
incoming voice messages.
Step 9
voicemail conversation caller recording-prompt
Example:
se-10-0-0-0(config)#voicemail conversation caller
recording-prompt
Enables playing the prompt to a caller to record a
message after the tone. Use the no form of this
command to disable playing the prompt.
Command or Action Purpose