Specifications

7-25
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 7 Configuring Voice Mail
Configuring System-Wide Voice-Mail Parameters
Example
The following example sets voicemail parameters.
se-10-0-0-0# config t
se-10-0-0-0(config)# voicemail capacity time 3000
se-10-0-0-0(config)# voicemail message mandatory-expiry
se-10-0-0-0(config)# voicemail default broadcast message expiration time 10
Step 10
voicemail mailbox-selection {last-redirect |
original-called}
Example:
se-10-0-0-0(config)# voicemail mailbox-selection
last-redirect
Specifies the mailbox in which a forwarded call’s
message is stored.
• last-redirect—The system stores the message
in the mailbox belonging to the extension that
received the call from the original called
party.
• original-called—The system stores the
message in the mailbox belonging to the
extension that was originally called.
Note The mailbox selection option does not
work if you select:
— The OCN option on a
Cisco
Unified CME system that networks
two Cisco Unity Express modules.
— The OCN option on a
Cisco
Unified Communications Manager
system that networks two Cisco Unity
Express modules that do not have a
configured voice-mail profile.
— The LRD option on a
Cisco
Unified Communications Manager
system that networks two Cisco Unity
Express modules.
Step 11
exit
Example:
se-10-0-0-0(config)# exit
Exits configuration mode.
Step 12
copy running-config startup-config
Example:
se-10-0-0-0# copy running-config startup-config
Copies the configuration changes to the startup
configuration.
Step 13
show voicemail limits
Example:
se-10-0-0-0# show voicemail limits
Displays system-wide voice-mail parameter
values.
Step 14
show language preferred
Example:
se-10-0-0-0# show language preferred
Displays which language the system is configured
to use and/or a list of the languages available.
Command or Action Purpose