Specifications

12-25
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 12 Configuring Message Notification
Configuring Message Notification for Devices
Examples
The following is sample output for the show voicemail notification owner command.
se-10-0-0-0# show voicemail notification owner mgrs profile
Message notification: enabled
Profile: vm-notif-profile
The following is sample output for the show voicemail notification owner email command.
se-10-0-0-0# show voicemail notification owner user6 email
Profile: vm-notif-profile
Device: email
Enabled: yes
Preference: all
Email: [e-mail]
Attach VM: yes
Schedule (active hours):
Sunday Inactive all day
Monday 08:00 to 11:30, 13:00 to 17:30
Step 6
username username profile vm-notif-profile email schedule
day day-of-week active from hh:mm to hh:mm
or
groupname groupname profile vm-notif-profile email
schedule
day day-of-week active from hh:mm to hh:mm
Example:
se-10-0-0-0# username user6 profile vm-notif-profile email
schedule day 2 active from 08:00 to 11:30
se-10-0-0-0# username user6 profile vm-notif-profile email
schedule day 2 active from 13:00 to 17:30
se-10-0-0-0# username user6 profile vm-notif-profile email
schedule day 3 active from 08:00 to 15:00
se-10-0-0-0# username user6 profile vm-notif-profile email
schedule day 6 active from 09:00 to 13:30
se-10-0-0-0# groupname mgrs profile vm-notif-profile email
schedule day 2 active from 08:30 to 18:00
se-10-0-0-0# groupname mgrs profile vm-notif-profile email
schedule day 3 active from 12:00 to 18:00
se-10-0-0-0# groupname mgrs profile vm-notif-profile email
schedule day 4 active from 09:00 to 15:00
se-10-0-0-0# groupname mgrs profile vm-notif-profile email
schedule day 5 active from 07:00 to 17:00
Specifies the days and times when message
notification is active for this device. This
operation changes only the specified time
slots; the other time slots are not changed.
• day-of-week—Valid values are 1 to 7,
where 1 is Sunday, 2 is Monday, and so
forth.
• hh—Valid values are 00 to 24. Use the
24-hour clock for start and end times.
• mm—Valid values are 00 or 30.
Repeat this step for each day of the week and
time block that message notification is active.
System messages occur for the following
conditions:
• Username or groupname does not exist.
• User or group does not have a mailbox.
• Profile does not exist.
• Start time is later than end time.
Step 7
show voicemail notification owner owner-id profile
Example:
se-10-0-0-0# show voicemail notification owner user6
profile
Displays the status of message notification for
the subscriber or group.
Step 8
show voicemail notification owner owner-id email
Example:
se-10-0-0-0# show notification owner mgrs email
Displays the settings for the subscriber or
group device.
Command or Action Purpose