Specifications

18-19
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 18 Configuring Advanced Voice Mail
Configuring Live Reply
Step 3
voicemail live-reply network-precedence
{phonenumberE164 [calling-number-rule] |
calling-number-rule}
Example:
se-10-0-0-0(config)# voicemail live-reply
network-precedence calling-number-rule
Determines which live-reply E.164 number
Cisco Unity Express dials when making a live-reply
to a VPIM delivered message. Specifies the use of
one of the following methods of determining the
live-reply E.164 number:
• Use only the number of the sender contained in a
VPIM message (if present)
• Use the number of the sender contained in a
VPIM message (if present). Otherwise, use the
number derived using the calling-number-rule
CLI described in
Step 4 below.
• Use only the number derived using the
calling-number-rule CLI described
in Step 4
below.
Step 4
voicemail live-reply calling-number-rule {extension
| prefix-extension | location-extension |
location-prefix-extension |
prefix-location-extension}
Example:
se-10-0-0-0(config)# voicemail live-reply
calling-number-rule location-extension
Specifies how the live-reply extension is derived from
the configuration and the VPIM vcard data. This
determines how to construct the remote subscriber’s
E.164 phone number. For more information, see the
“Calling Number Rule” section on
page 16Table 18-3.
Step 5
voicemail live-reply restriction table-name
Example:
se-10-0-0-0(config)# voicemail live-reply
restriction live-reply-r-table
Associates a restriction table to the live reply feature.
Step 6
network location id ID_number
Example:
se-10-0-0-0(network)# network location id 112
Enters network location mode.
Step 7
calling-number-rule prepend-digits digits
Example:
se-10-0-0-0(config)# calling-number-rule
prepend-digits 91
Specifies additional digits to dial before the
calling-number rule derived E.164 number for a
remote subscriber.
Step 8
end
Example:
se-10-0-0-0(config)# end
Exits to privileged EXEC mode.
Step 9
show voicemail live-reply
Example:
se-10-0-0-0# show voicemail live-reply
(Optional) Displays the current configuration for the
live-reply feature.
Command or Action Purpose