Specifications

18-39
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 18 Configuring Advanced Voice Mail
Configuring Restriction Tables
DETAILED STEPS
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
Enters configuration mode.
Step 2
restriction table-name dial-string preference
preference-number pattern pattern-string
{allowed |
disallowed}
[insert]
Example:
se-10-0-0-0(config)# restriction msg-notification
dial-string preference 2 pattern 91222* disallowed
se-10-0-0-0(config)# restriction msg-notification
dial-string preference 2 pattern 91800* allowed
insert
(Optional) Specifies the dial string that the system
uses to verify a phone number assigned to a phone
device or numeric pager. Use this command to add a
new dial string to the restriction table or to modify an
existing dial string.
• preference-number—Order of this string in the
restriction table. The system searches the strings
in order of preference, starting with 1. Valid
values are 1 to 10.
The default pattern * has preference 1 by default.
The administrator can modify this setting.
• pattern-string—Call pattern to be matched. Valid
characters are digits 0 to 9, asterisk (*), or dot (.).
The table accepts duplicate call patterns.
The default pattern * cannot be deleted or
modified.
• allowed—Permits phone numbers with this
pattern to be assigned to message notification
devices.
The default pattern * is allowed by default. The
administrator can modify this setting.
• disallowed—Prevents phone numbers with this
pattern from being assigned to message
notification devices.
• insert—(Optional) Inserts the dial string in the
proper place in the table. The system increases
the preference number of existing strings
appropriately. The system displays a system
message if the preference number is less than 1 or
greater than 10.
If insert is not used, the system replaces any
existing dial string with the given preference
with this new dial string. The system displays a
system message if no existing dial string has the
given preference.