Specifications
22-4
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 22 Registering Cisco Unity Express Endpoints to Cisco Unified Messaging Gateway
Configuring Autoregistration with Cisco UMG
DETAILED STEPS
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
Enters configuration mode.
Step 2
messaging-gateway registration 
Example:
se-10-0-0-0(config)# messaging-gateway registration
Causes the endpoint (Cisco Unity Express) to send a 
registration message to its primary and, if 
applicable, to its secondary messaging gateway, 
unless registration with the primary fails due to a 
configuration error.
Step 3
messaging-gateway primary location-id umg-ip-addr  
[ port umg-port ] 
Example:
se-10-0-0-0(config)# messaging-gateway primary 100 
192.0.2.0 port 8080
Enters gateway configuration mode and specifies the 
following information for the primary messaging 
gateway:
  • location-id--the location-id of the primary 
messaging gateway
  • umg-ip-addr--the IP address or domain name of 
the primary messaging gateway
  • (optional) port--port the primary messaging 
gateway will be listening on. The default port is 
80.
The primary Cisco UMG must be configured before 
the secondary. Otherwise, you will get the error 
message “Primary messaging gateway needs to be 
configured first.”
Step 4
username umg-reg-id password encryption-level 
umg-password
Example:
se-10-0-0-0(config-gateway)# username cue31 password 
text herein
(Optional) Specifies the username and password 
required to authorize registration with the message 
gateway.
  • umg-reg-id--the registration ID the endpoint 
will use to register with the messaging gateway. 
Note that it is not necessarily the same as the 
location-id, because multiple endpoints may be 
assigned the same umg-reg-id.
You can give either an encrypted password or 
non-encrypted password: encrypted and text tokens 
need to be used.
  • encryption-level-- The two acceptable values 
for this variable are 
  –
text
  –
encrypted
  • umg-password--the password for registration 
with a messaging gateway is an alphanumeric 
string up to x in length.










