Specifications
22-5
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 22 Registering Cisco Unity Express Endpoints to Cisco Unified Messaging Gateway
Configuring Autoregistration with Cisco UMG
Step 5
retry-interval retry-interval
Example:
se-10-0-0-0(config-gateway)# retry-interval 2
(Optional) The retry-interval is the delay before the 
endpoint attempts to re-register with the messaging 
gateway. The value is expressed in minutes. The 
default is 5 minutes.
Step 6
end
Example:
se-10-0-0-0(config-gateway)# end
Exits gateway configuration mode and enters 
configuration mode.
Step 7
messaging-gateway secondary location-id umg-ip-addr 
[ port umg-port ]
Example:
se-10-0-0-0(config)# messaging-gateway secondary 200 
192.0.2.1 port 8080
(Optional) Enters gateway configuration mode and 
specifies the following information for the 
secondary messaging gateway:
  • location-id--the location-id of the secondary 
messaging gateway
  • umg-ip-addr--the IP address or domain name of 
the secondary messaging gateway, and
  • (optional) port--port the secondary messaging 
gateway will be listening on. The default port is 
80.
The secondary Cisco UMG must be configured after 
the primary. Otherwise, you will get the error 
message “Primary messaging gateway needs to be 
configured first.”
Step 8
username umg-reg-id password encryption-level 
umg-password
Example:
se-10-0-0-0(config-gateway)# username cue31 password 
text herein
(Optional) Specifies the username and password 
required to authorize registration with the message 
gateway.
  • umg-reg-id--the registration ID the endpoint 
will use to register with the messaging gateway. 
Note that it is not necessarily the same as the 
location-id, because multiple endpoints may be 
assigned the same umg-reg-id.
You can give either an encrypted password or 
non-encrypted password: encrypted and text tokens 
need to be used.
  • encryption-level-- The two acceptable values 
for this variable are 
  –
text
  –
encrypted
  • umg-password--the password for registration 
with a messaging gateway is an alphanumeric 
string up to x in length.
Command or Action Purpose










