Specifications

22-10
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 22 Registering Cisco Unity Express Endpoints to Cisco Unified Messaging Gateway
Manually Registering a Cisco Unity Express Endpoint
Examples
The following examples illustrate the output from the show network commands on company
Mycompany’s call control system in San Jose with remote voice-mail provided by six remote Cisco
Unity Express sites.
se-10-0-0-0# show network locations
ID NAME ABBREV DOMAIN
101 'San Jose' SJC sjc.mycompany.com
102 'Dallas/Fort Worth' DFW dfw.mycompany.com
201 'Los Angeles' LAX lax.mycompany.com
Step 11
network local location-id number
Example:
se-10-0-0-0(config)# network local location-id 1
Enables networking for the local Cisco Unity Express
system identified by the location-id number.
• To delete the local location, use the no form of this
command.
Caution If you delete the local network location and
then save your configuration, when you reload
Cisco
Unity Express, the local network location
will remain disabled. After Cisco Unity Express
restarts, reenter the network local location-id
command to reenable networking at this
location.
Step 12
exit
Example:
se-10-0-0-0(config)# exit
Exits configuration mode.
Step 13
show network locations configured
Example:
se-10-0-0-0# show network locations configured
(Optional) Displays the location-id, name, abbreviation,
and domain name for each configured Cisco Unity
Express location.
Step 14
show network detail location-id number
Example:
se-10-0-0-0# show network detail location-id 9
(Optional) Displays network information for the specified
location-id, including the number of messages sent and
received.
Step 15
show network detail local
Example:
se-10-0-0-0# show network detail local
(Optional) Displays network information for the local
Cisco Unity Express location, including the number of
messages sent and received.
Step 16
show network queues
Example:
se-10-0-0-0# show network queues
(Optional) Displays information about messages in the
outgoing queue that are to be sent from this
Cisco Unity Express system. The queue information
contains three displays: one for urgent job queue
information, one for normal job queue information, and
one for running job information.
Command or Action Purpose