Specifications

4-6
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 4 Configuration Tasks
Configuration Tasks
19. (Optional) Configuring SNMP Monitoring,
page 1
• SNMP community strings (passwords) that permit users to read and
write SNMP MIB objects (variables). Specify whether these
community strings will have read-only or read-write privileges. The
system supports a maximum of 5
read-only community strings and
5
read-write community strings. Each community string may have a
maximum of 15 alphanumeric characters, including letters A to Z,
letters a to z, digits 0 to 9, underscore (_), and hyphen (-).
• IP address and community string of the host server that will receive
SNMP traps from Cisco Unity Express. If no host is defined, the
system discards the trap. The system supports a maximum of 5 hosts
(trap receivers).
No host is considered the primary host. The system sends the SNMP
notifications to all enabled hosts.
• (Optional) SNMP server contact information for this managed node.
• (Optional) SNMP server location information for this managed
node.
• Threshold values for the following activities:
– Entering a login username.
– Entering a password.
– Entering a personal identification number (PIN) user ID.
– Entering a PIN password.
– Resetting a PIN.
20. (Optional) “” on page 1 • For Cisco Unified Communications Manager systems: Ensure that
all phones configured to use VoiceView Express are controlled by
the JTAPI user configured on Cisco Unity Express.
• For Cisco Unified CME systems: Ensure that the
Cisco
Unified CME authentication server URL points to
Cisco
Unity Express.
• Number of minutes a VoiceView Express session can be inactive
before the system disconnects the session.
• (Optional) URL for the fallback authentication server (for
Cisco
Unified CME systems)
21. (Optional) “Configuring Restriction Tables”
on page 32
Configure restriction tables to use with the following features:
• Fax
• Message notification
• Live reply
• Nonsubscriber message delivery
Table 4-1 Configuration Tasks (continued)
Task and Procedure Location Additional Information Needed