Specifications

4-9
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 4 Configuration Tasks
Configuration Tasks
31. (Optional) Configuring Network Locations,
page 3
• Network location ID number—Unique ID number for each location
used by the voice-mail sender to send a remote message. The
maximum length of the number is 7 digits. Cisco Unity Express
supports a maximum of 500 locations.
• E-mail domain name—E-mail domain name or IP address for the
local Cisco
Unity Express system that is attached to the local
voice-mail originator’s extension when sending a VPIM message.
The local system’s e-mail domain name must be configured to
receive remote voice-mail messages.
• (Optional) Location name—Descriptive name of the network
location.
• (Optional) Abbreviated location name—Abbreviated description of
the network location.
• (Optional) Voice-mail system telephone number prefix—Phone
number prefix that is added to a local voice-mail originator’s
extension to create a VPIM address. A prefix is required only if an
e-mail domain services multiple locations, and extensions between
the locations are not unique. The maximum length of the prefix is
15 digits.
• (Optional) Length of the voice-mail system extensions.
• (Optional) VPIM encoding scheme—Encoding scheme options for
translating voice-mail messages at the local Cisco
Unity Express
system are dynamic, G.711ulaw, or G.726.
• (Optional) Voice-mail spoken name capability—Enabling this
functionality permits receipt of a voice-mail originator’s spoken
name, which is played at the beginning of the received voice-mail
message.
32. (Optional) Configuring Distribution Lists,
page 1
The following information is required to create a public distribution list:
• List name and number
• (Optional) List owner
• (Optional) List description—The description can have a maximum
of 64 characters.
The following information is required to add members to a distribution
list:
• Member type (user, group, GDM, list, remote, or blind)
• Member name or extension
Note Local and remote subscribers must be previously defined on the
system.
Table 4-1 Configuration Tasks (continued)
Task and Procedure Location Additional Information Needed