Data Sheet

Data Sheet
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 15
Description Specification
WS-C3560CG-8TC-S 13.2 mpps
WS-C3560CG-8PC-S 13.2 mpps
Forwarding rate 64 Byte Packet Cisco Catalyst 2960-C
WS-C2960CG-8TC-L 13.2 mpps
WS-C2960CPD-8PT-L 3.8 mpps
WS-C2960CPD-8TT-L 3.8 mpps
Resource Cisco Catalyst 3560-C, 2960-C Default Routing
Unicast MAC addresses 8000 4000
IGMP groups and multicast routes 250 250
Unicast routes 750 875
Directly connected hosts 250 750
Indirect routes 750 875
QoS classification ACEs 125 375
Security ACEs 375 375
VLANs 255 255
Connectors and
cabling
Cisco Catalyst 3560-C and 2960-C with SFP-based ports:
●
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
●
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
●
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
●
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
●
1000BASE-SX -LX/LH, -ZX, -BX, -T
*
, -FX
*
, and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
●
100BASE-LX, -BX, -FX: SFP-based ports: LC fiber connectors (single/multimode fiber)
*
GLC-T and GLC-GE-100FX are not supported
For the complete list of SFP's supported please see:
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html
Power connectors
●
Customers can provide power to a switch only by using the internal power supply (2960CPD-8TT-L and 2960CPD-8PT-L
do not require a power supply). The connector is located at the back of the switch. The internal power supply is an
autoranging unit.
●
The internal power supply supports input voltages between 100 and 240VAC.
●
Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
Note: The Cisco Catalyst 2960CPD-8TT-L and 2960CPD-8TT-L has an option for an external power adapter if desired.
Indicators
●
Per-port status: Link integrity, disabled, activity, speed, full-duplex
●
System status: System, RPS, link status, link duplex, link speed
Cisco Catalyst 2960-C Inches Centimeters
WS-C2960CPD-8TT-L 1.75x10.6x6.8 44.4x269x172
WS-C2960CPD-8PT-L 1.75x10.6x6.8 44.4x269x172
WS-C2960CG-8TC-L 1.75x10.6x8.4 44.4x269x213
Cisco Catalyst 3560-C Inches Centimeters
WS-C3560CG-8TC-S 1.75x10.6x8.4 44.4x269x213
Dimensions
(H x W x D)
WS-C3560CG-8PC-S 1.75x10.6x9.4 44.4x269x238
Cisco Catalyst 2960-C Pounds Kilograms
WS-C2960CPD-8TT-L 2.4 1.08
WS-C2960CPD-8PT-L 2.4 1.08
WS-C2960CG-8TC-L 3.0 1.35
Cisco Catalyst 3560-C Pounds Kilograms
WS-C3560CG-8TC-S 3.0 1.35
Weight
WS-C3560CG-8PC-S 4.25 1.92
Cisco Catalyst 3560-C Cisco Catalyst 2960-C Environmental ranges
Operating* temperature up to
5000 ft (1524 m)
-5°C to + 40°C +23°F to + 104°F -5°C to +40°C +23°F to +104°F