Data Sheet Cisco Catalyst 3750-X and 3560-X Series Switches The Cisco® Catalyst® 3750-X and 3560-X Series Switches are an enterprise-class lines of stackable and standalone switches, respectively. These switches provide high availability, scalability, security, energy efficiency, and ease of operation with innovative features such as Cisco StackPower (available only on the Catalyst 3750X), IEEE 802.
Switch Configurations All switch models can be configured with four optional network modules. The PoE+ and non-PoE switch models are available with either the LAN Base or IP Base feature set. IP Services feature set is available as an upgrade option at the time of ordering or through a license at a later time. The GE SFP switch models are available with either IP Base or IP Services feature set. Stackable Switches Figure 1 shows the Cisco Catalyst 3750-X Series Switches (front and back). Figure 1.
Standalone Switches Figure 2 shows Cisco Catalyst 3560-X Series Switches. Figure 2. Cisco Catalyst 3560-X Series Switches Table 2 shows the Cisco Catalyst 3560-X Series configurations. Table 2.
The IP Services feature set is only available as an upgrade option at the time of ordering or through a license at a later time; there is no dedicated IP Services switch model. The Cisco Catalyst 3750-X Series Switches with LAN Base feature set can only stack with other Cisco Catalyst 3750-X Series LAN Base switches. A mixed stack of LAN Base switch with IP Base or IP Services features set is not supported.
Figure 3. StackPower Connector StackPower can be deployed in either power sharing mode or redundancy mode. In power sharing mode, the power of all the power supplies in the stack is aggregated and distributed among the switches in the stack. In redundant mode, when the total power budget of the stack is calculated, the wattage of the largest power supply is not included.
Network Module Figure 4 shows various Network Modules with Four GbE, Two 10GbE SFP+ Interfaces, Two 10GB-T and Service Module with Two 10GbE SFP+ Interfaces. Figure 4. Network Modules with Four GbE, Two 10GbE SFP+ Interfaces, Two 10GB-T and Service Module with Two 10GbE SFP+ Interfaces The Cisco Catalyst 3750-X Series and 3560-X Series Switches support four optional network modules for uplink ports.
Table 4. 10GbE Network Module Configuration Interface Options Network Module 10GbE SFP+ Ports GbE SFP Ports 1GbE 0 4 10GbE Network Module 2 0 0 4 1 2 10GB-T 2 (RJ-45) 0 Service Module 2 0 1 1 0 2 Service Module The new Cisco Service Module offers enhaced security and Flexible Netflow (FNF) features on the uplink ports of the Catalyst 3750-X and 3560-X. The service module is supported with IP Base or IP Services feature set. It can be used with SFP or SFP+ at 1G or 10G speeds.
Enabling FNF at the access switch ensures you get all flows. The access switch is the most logical place in the network for collecting statistics and monitoring all flows. With Netflow, you can obtain MAC-address and access port information associated with the flow, to get directly to the source of the flow. Most collectors are able to leverage the location based on MAC-address and interface port number provided by the access switch to the collector.
Figure 5. Dual Redundant Power Supplies Table 6 shows the different power supplies available in these switches and available PoE power. Table 6.
Power over Ethernet Plus (PoE+) In addition to PoE 802.3af, the Cisco Catalyst 3750-X and 3560-X Series Switches support PoE+ (IEEE 802.3at standard), which provides up to 30W of power per port. The Cisco Catalyst 3750-X and 3560-X Series Switches can provide a lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet ® wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant end device.
Borderless experience is only possible with intelligent network elements designed and architected to meet the needs of a global workspace. Cisco Network Access is a primary component of this architecture, enabling various borderless network services such as mobility, security, MediaNet, EnergyWise, and ease of operations for increased productivity and operational efficiency. When network access is intelligent, it knows the identity of the user, as well as where the user is on the network.
Efficient Switch Operation Cisco Catalyst 3750-X and 3560-X Series Switches, designed and engineered by Cisco, provide optimum power saving, low power operations for industry best-in-class power management, and power consumption capabilities. The Cisco Catalyst 3750-X and 3560-X ports are capable of reduced power modes so that ports not in use can move into a lower power utilization state.
● Cisco Smart Troubleshooting is an extensive array of debug diagnostic commands and system health checks within the switch, including Generic Online Diagnostics (GOLD) and Onboard Failure Logging (OBFL). Easy to Use Deployment and Control Features ● Embedded Event Manager (EEM) is a powerful and flexible feature that provides real-time network event detection and onboard automation. Using EEM, customers can adapt the behavior of their network devices to align with their business needs.
● Internet Group Management Protocol (IGMP) Snooping for IPv4 and IPv6 MLD v1 and v2 Snooping provide fast client joins and leaves of multicast streams and limit bandwidth-intensive video traffic to only the requestors. ● Multicast VLAN Registration (MVR) continuously sends multicast streams in a multicast VLAN while isolating the streams from subscriber VLANs for bandwidth and security reasons.
For detailed information about Cisco Network Assistant, visit http://www.cisco.com/go/cna. CiscoWorks LAN Management Solution CiscoWorks LAN Management Solution (LMS) is a comprehensive network lifecycle management solution. It provides an extensive library of easy-to-use features to automate the initial and day-to-day management of your Cisco network infrastructure.
● Dynamic ARP Inspection (DAI) helps ensure user integrity by preventing malicious users from exploiting the insecure nature of the ARP protocol. ● IP source guard prevents a malicious user from spoofing or taking over another user’s IP address by creating a binding table between the client’s IP and MAC address, port, and VLAN. Cisco TrustSec TrustSec secures access to the network, enforces security policies, and delivers standard based security solutions such as 802.
● Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3) provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSH Protocol, Kerberos, and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions. ● Bidirectional data support on the Switched Port Analyzer (SPAN) port allows Cisco Intrusion Detection System (IDS) to take action when an intruder is detected.
● IEEE 802.1s/w Rapid Spanning Tree Protocol (RSTP) and Multiple Spanning Tree Protocol (MSTP) provide rapid spanning-tree convergence independent of spanning-tree timers and also offers the benefit of Layer 2 load balancing and distributed processing. Stacked units behave as a single spanning-tree node. ● Per-VLAN Rapid Spanning Tree (PVRST+) allows rapid spanning-tree reconvergence on a per-VLAN spanning-tree basis, without requiring the implementation of spanning-tree instances.
● Eight egress queues per port help enable differentiated management of different traffic types across the stack. Four queues are user configurable and four are reserved for system use. ● Shaped Round Robin (SRR) scheduling helps ensure differential prioritization of packet flows by intelligently servicing the ingress queues and egress queues. ● Weighted Tail Drop (WTD) provides congestion avoidance at the ingress and egress queues before a disruption occurs.
Cisco Catalyst 3750-X and 3560-X Series Specifications Switch Performance Table 9 shows Cisco Catalyst 3750-X and 3560-X Series Switches performance specifications. Table 9.
Access Default Routing VLAN QoS classification ACEs 0.5K 0.5K 0.5K 0.5K Security ACEs 2K 1K 1K 1K VLANs 1K 1K 1K 1K Dimensions, Weight, Acoustic, MTBF, and Environmental Range Specifications for Cisco Catalyst 3750-X and 3560-X Series Switches Table 11 shows dimensions, weight, acoustic, MTBF, and environmental range. Table 11. Dimensions, Weight, Acoustic, MTBF, and Environmental Range Dimensions (H x W x D) Inches Centimeters 3750X-24T 1.75 x 17.5 x 18.0 4.45 x 44.5 x 46.
3560X-24P 181,370 3560X-48T 186,778 3560X-48P 149,594 3560X-48PF 149,594 C3KX-PWR-350WAC 580,710 C3KX-PWR-715WAC 664,055 C3KX-PWR-1100WAC 392,174 C3KX-PWR-440WDC 469,350 C3KX-NM-1G 5,083,574 C3KX-NM-10G 2,468,553 C3KX-NM-10GT 1,411,719 C3KX-SM-10G 396,940 Environmental Ranges With AC Power Supply Normal Operating Temperature and Altitudes: -5ºC to +45ºC, up to 5,000 feet (1500 m) Operating Environment and Altitude -5ºC to +40ºC, up to 10,000 feet (3000 m) * Short-Term Exceptional
Nonoperating: 55G, 10ms Trapezoid Note: GLC-GE-100FX and GLC-T SFPs are not supported for NEBS short-term operation. Connectors and LED Indicators for Cisco Catalyst 3750-X and 3560X Series Table 12 shows connectors and LED indicators. Table 12.
Description Specification Standards IEEE 802.1s RMON I and II standards IEEE 802.1w SNMPv1, SNMPv2c, and SNMPv3 IEEE 802.1x IEEE 802.1x-Rev IEEE 802.3ad IEEE 802.1ae IEEE 802.3af IEEE 802.3at IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS Prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.
Description Specification Altitude 10,000 ft. (3000 meters), up to 45°C MTBF Calculated MTBF must be greater than 300,000 using Telcordia SR-332, Method 1, Case 3. Demonstrated MTBF is 500,000 hr (with 90% confidence level).
Safety and Compliance Table 16 lists the safety and compliance information for the Cisco Catalyst 3750-X and 3560-X Series. Table 16. Safety and Compliance Information for Cisco Catalyst 3750-X and 3560-X Series Description Specification Safety Certifications UL60950-1 C-UL to CAN/CSA 22.2 No.
Cisco Enhanced Limited Lifetime Hardware Warranty Effective Date Hardware warranty commences from the date of shipment to customer (and in case of resale by a Cisco reseller, not more than 90 days after original shipment by Cisco).
Technical Services Cisco Focused Technical Support Services ● 3 levels of premium, high-touch services are available: ● Cisco High-Touch Operations Management Service ● Cisco High-Touch Technical Support Service ● Cisco High-Touch Engineering Service ● Valid Cisco SMARTnet or SP Base contracts on all network equipment are required. Notes: 1. Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the licensed feature set. 2.
Product Number Product Description WS-C3560X-24P-L Standalone 24 10/100/1000 Ethernet PoE+ ports, with 715W AC power supply 1 RU, LAN Base feature set WS-C3560X-48P-L Standalone 48 10/100/1000 Ethernet PoE+ ports, with 715W AC power supply 1 RU, LAN Base feature set WS-C3560X-48P-L Standalone 48 10/100/1000 Ethernet PoE+ ports, with 715W AC power supply 1 RU, LAN Base feature set WS-C3560X-48PF-L Standalone 48 10/100/1000 Ethernet PoE+ ports, with 1100W AC power supply 1 RU, LAN Base feature set W
Product Number Product Description SFP-10G-LRM= 10GBASE-LRM SFP+ module SFP-H10GB-CU1M= 10GBASE-CX1 SFP module SFP-H10GB-CU3M= 10GBASE-CX3 SFP module SFP-H10GB-CU5M= 10GBASE-CX5 SFP module SFP Transceivers for Cisco Catalyst 3750-X and 3560-X Series 1,3 GLC-GE-100FX= 100BASE-FX SFP on Gigabit Ethernet SFP ports for LAN switches GLC-LH-SM= Gigabit Ethernet SFP, LC connector LX/LH transceiver GLC-SX-MM= Gigabit Ethernet SFP, LC connector SX transceiver GLC-T= 1000BASE-T SFP transceiver modul
Product Number Product Description DWDM-SFP-4772= DWDM SFP 1547.72 nm SFP (100 GHz ITU grid) DWDM-SFP-4851= DWDM SFP 1548.51 nm SFP (100 GHz ITU grid) DWDM-SFP-4931= DWDM SFP 1549.32 nm SFP (100 GHz ITU grid) DWDM-SFP-5012= DWDM SFP 1550.12 nm SFP (100 GHz ITU grid) DWDM-SFP-5092= DWDM SFP 1550.92 nm SFP (100 GHz ITU grid) DWDM-SFP-5172= DWDM SFP 1551.72 nm SFP (100 GHz ITU grid) DWDM-SFP-5252= DWDM SFP 1552.52 nm SFP (100 GHz ITU grid) DWDM-SFP-5332= DWDM SFP 1553.
Table 20.
Please note that the same power supplies used in the 3750-X and 3560-X are all usable in the XPS-2200 (please refer to Table 12) Table 21.
Description Specification CCC EMC for China on Spare Power Supplies: EN61000-3-2 (GB17625.1-1998) BSMI Class A for Taiwan: CNS13438 KCC (formerly MIC) GB17625.1-1998 Class A for Korea: KN24/KN22 AS/NZS Class A for Australia: CISPR22:2004 or EN55022 Brazil, ANATEL In-Country approval CE Class A for European Union: EN55022, EN300386, EN55024 (CISPR24) Safety certifications UL 60950-1 CAN/CSA 22.2 No.
Fans The Cisco XPS 2200 has 3 field-replaceable fan modules (XPS-2200-FAN). Table 27 describes the fan module for the XPS2200. Table 27. Cisco XPS 2200 Fan module dimensions and weight Dimensions (H x W x D) XPS2200 Fan Module ● Weight Inches Centimeters Pounds Kilograms 1.59 x 1.59 x 4.24 4.04 x 4.04 x 10.77 .13 .
Cisco XPS2200 Ordering information Table 29 shows Cisco XPS2200 ordering information. Table 29.