Datasheet

© 2015 Cisco and/or its affiliates. This document is Cisco Public Information. Page 2 of 30
●
Enhanced limited lifetime warranty (E-LLW) with next business day (NBD) advance hardware replacement
and 90-day access to Cisco Technical Assistance Center (TAC) support
Switch Configurations
All switches ship with one of the four power supplies (350WAC, 715WAC, 1100WAC, or 440WDC). Figure 1 shows
the Cisco Catalyst 3850 Series Switches.
Figure 1. Cisco Catalyst 3850 Series Switches
Table 1 shows the Cisco Catalyst 3850 Series configurations.
Table 1. Cisco Catalyst 3850 Series Configurations
Models
Total 10/100/1000 or SFP
Ethernet Ports
Default AC Power Supply
Available PoE Power
StackPower
WS-C3850-24T
24
350WAC
-
Yes
WS-C3850-48T
48
WS-C3850-24P
24 PoE+
715WAC
435W
WS-C3850-48P
48 PoE+
WS-C3850-48F
48 PoE+
1100WAC
800W
WS-C3850-24U
24 UPOE
1100WAC
800W
WS-C3850-48U
48 UPOE
1100WAC
800W
WS-C3850-12S
12 SFP
350WAC
-
WS-C3850-24S
24 SFP
Network Modules
The Cisco Catalyst 3850 Series Switches support three optional network modules for uplink ports. The default
switch configuration doesn’t include the uplink module. At the time of switch purchase the customer has the
flexibility to choose from the network modules described in Table 2.
Figure 2 shows various network modules:
●
4 x Gigabit Ethernet with Small Form-Factor Pluggable (SFP) receptacles
●
2 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP receptacles
●
4 x 10 Gigabit Ethernet with SFP+ receptacles (supported on the 48-port models only)