Datasheet
Table Of Contents
- Data Sheet
- Cisco Catalyst 4948-10GE Switch

© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 9 of 16
• RMON2-MIB.my (RFC 2021)
• SMON-MIB.my (Internet-Draft)
• SNMP-FRAMEWORK-MIB.my (RFC 2571)
• SNMP-MPD-MIB.my (RFC 2572)
• SNMP-NOTIFICATION-MIB.my (RFC 2573)
• SNMP-TARGET-MIB.my (RFC 2573)
• SNMP-USM-MIB.my (RFC 2574)
• SNMP-VACM-MIB.my (RFC 2575)
• SNMPv2-MIB.my
• TCP-MIB.my
• UDP-MIB.my
• RIP SNMP MIB
Industry Standards
• Ethernet—IEEE 802.3 and 10BASE-T
• Fast Ethernet—IEEE 802.3u, 100BASE-TX, and 100BASE-FX
• Gigabit Ethernet—IEEE 802.3z and 802.3ab
• IEEE 802. 1D Spanning Tree Protocol
• IEEE 802.1w rapid reconfiguration of spanning tree
• IEEE 802. 1s multiple VLAN instances of spanning tree
• IEEE 802.3 ad LACP
• IEEE 802. 1p class-of-service (CoS) prioritization
• IEEE 802.1Q VLAN
• IEEE 802. 1x user authentication
• X2 support
• RMON I and II standards
Indicator and Port Specifications
• System status—Green (operational); red (faulty)
• Console—RJ-45 female
• Reset (switch recessed protected)
• Uplinks—Link and active
• Image management port—10/100BASE-TX (RJ-45 female) data terminal equipment (DTE); green (good); orange (disabled); off (not connected)
Supported X2 Optics
Table 3 lists the X2 optics supported by the Cisco Catalyst 4948-10GE.










